Catalysis of organic pollutant photodegradation by metal phthalocyanines immobilized on TiO<Subscript>2</Subscript>@SiO<Subscript>2</Subscript>

A TiO2@SiO2 hybrid support was prepared by the sol-precipitation method using n-octylamine as a template.The photocatalyst manganese phthalocyanine tetrasulfonic acid (MnPcS) was immobilized on the support to form MnPcS-TiO2@SiO2.X-ray diffraction (XRD) and UV-Visible diffuse reflectance spectra (UV-Vis DRS) were employed to characterize the catalyst.The photocatalytic degradation of rhodamine B (RhB) and the catalytic oxidation of o-phenylenediamine (OPDA) under visible light irradiation were used as probe reactions.The mineralization efficiency and the degradation mechanism were evaluated using chemical oxygen demand (COD Cr) assays and electron spin resonance (ESR),respectively.RhB was efficiently degraded by immobilized MnPcS-TiO2@SiO2 under visible light irradiation.Complete decolorization of RhB occurred after 240 min of irradiation and 64.02% COD Cr removal occurred after 24 h of irradiation.ESR results indicated that the oxidation process was dominated by the hydroxyl radical (·OH) and superoxide radical (O-·2) generated in the system.     

The synthesis and properties study of 6,13-diphenylpentacene

6,13-diphenylpentacene（DPP） was synthesized by 6,13-pentacenequinone and the Grignard reagent with the SnCl2/HCl as the reducing agent. It was detected by ^1H NMR, infrared spectra, X-ray diffraction （XRD）, UV-visible spectra and fluorescence spectra. Substitution with phenyl at the C-6 and C-13 positions of pentacene leads to phenomenal enhancement in solubility and a little enhancement in photooxidative stability. XRD results showed that the pattern of 6,13-diphenylpentacene was different from the patterns of pentacene and 6,13-pentacenequinone. UV-Visible spectra showed that the λmax of DPP in HCCl3 was 600 nm. The fluorescence spectra showed that DPP emitted purple （430 nm） and red （612 nm） when excited by UV, while only emitted red when excited by visible light. But it is still susceptible to photooxidation. The photooxidation product of DPP was also studied.     

Mechanism of oxidative damage to DNA by Fe-loaded MCM-41 irradiated with visible light

The mechanism of oxidative damage to deoxyribonucleic acid (DNA) by iron-containing mesoporous molecular sieves (MCM-41) irradiated with visible light was elucidated. Fe-loaded MCM-41 (Fe/MCM-41) was used as a photocatalyst and the damage to calf thymus DNA caused by hydrogen peroxide (H2O2) was studied. The damage and extent of oxidation of DNA were measured by high-performance liquid chromatography (HPLC) and intermediate products were detected by HPLC/electrospray ionization tandem mass spectrometry. Electron spin resonance was used to detect changes in reactive oxygen species and peroxidase catalytic spectrophotometry was used to determine the concentration of H2O2. The results indicated that Fe/MCM-41 efficiently activated H2O2 in solution at pH 4.0-8.0 under irradiation with visible light. The photocatalytic system degraded DNA most effectively at pH 5.0-6.0 but also operated at pH 8.0. At pH 4.2, the degree of DNA damage reached 25.65% after 5 h and the kinetic constant was 5.89×10 2 min 1. Damage to DNA was predominantly caused by hydroxyl radicals generated in the system. The mechanism of DNA damage is of potential concern to human health because it can occur in neutral solutions irradiated by visible light.     

Degradation of organic pollutants by a Co3O4-graphite composite electrode in an electro-Fenton-like system

A novel composite electrode was constructed by pressing together Co3O4 and graphite and it was used as the cathode in an electro-Fenton-like (EFL) system. The poor electron transport characteristic of Co3O4 was overcome by incorporating graphite. In situ electro-catalytic generation of hydroxyl radicals (·OH) occurred at high current efficiencies from pH 2-10, extending the traditional Fenton reaction pH range. Cyclic voltammetry and AC impedance spectrometry were used to characterize the composite electrode. The ability of the EFL system to degrade organic compounds was investigated using sulforhodamine B (SRB) and 2,4-dichlorophenol (2,4-DCP) as probes. Decoloration of SRB (1.0×10-5 mol/L) was complete (100%) in 150 min and SRB was effectively degraded from pH 2-10. The decomposition of SRB was studied using Fourier transform infrared spectroscopy (FT-IR) and total organic carbon (TOC) analysis and results indicated that the final degradation products were carbon dioxide, carboxylic acids and amines. The EFL system also decomposed 2,4-DCP and the degradation was 98.6% in 240 min. Electro-catalytic degradation of SRB occurs by a ·OH mechanism. After 5 times reused, the degradation rate of SRB did not significantly slow down. The electrode shows excellent potential for use in advanced oxidation processes (AOPs) used to treat persistent organic pollutants (POPs) in wastewater.     

Mechanochemical preparation of sulfur-doped nanosized TiO2 and its photocatalytic activity under visible light

In order to make nanosized TiO2 photocatalyst responsive to visible light and effectively utilize solar energy, we have, for the first time, prepared S-doped nanosized TiO2 by a mechanochemical method with hydrolysis of TiCl4. The as-prepared S-doped nanosized TiO2 possesses strong absorption for visible light of 400-650 nm and shows high photocatalytic activity for decomposition of methylene blue under irradiation of visible light. The oxidation states of the S atoms incorporated into TiO2 were determined to be S^6＋ and S^4＋. The comparative study of fluorescence emission spectra shows that S-doping has also improved the separation of electron-hole pairs.     

A Novel Polymethyl Methacrylate （PMMA）TiO2 Nanocomposite and Its Thermal and Photic Stability

A new kind of polymethyl methacrylate （PMMA）-TiO2 nanocomposite was synthesized through polymerization. The thermal and photic stability of this PMMA TiO2 nanocomposites were investigated. The as prepared samples were characterized by scanning electron microscopy （SEM）, UV-Vis spectroscopy, differential thermal analysis （DTA） and the photo-induced weight loss, The results show that the photostability of the PMMA-TiO2 nanocomposite is higher than that of the pure PMMA under UV-light irradiation, The weight loss of the pure PMMA reaches 30 % after 300 h UVirradiation, while the composite only 0.3% under the identical experimental condition. The glass transition temperature （TR） of pure PMMA is only 80℃, while the Tg of the composite reaches 258℃. Compared with pure PMMA, the thermal stability of the composite is greatly enhanced.     

Synthesis of PbS–K2La2Ti3O10 composite and its photocatalytic activity for hydrogen production

Photocatalyst, lead sulfide (PbS )-intercalated layer perovskite-type compound (K2La2Ti3O10), was synthesized via ion-exchange reaction, butylamine pillaring and sulfuration processes under the assistance of the microwave irradiation. The structure of the photoc atalysts was determined by means of powder X-ray diffraction, scanning electron microscope, ultraviolet- visible diffuse reflection spectra and photoluminescence measu rement. And the photocatalytic activity of the composite compound for hydrogen production was also investigated. The experimental results showed that the intercalation of PbS in the layered space of K2La2Ti3O10 greatly improved the absorption edge and the photocatalytic activity. Hydrogen production of the PbS–K2La2Ti3O10 was 127.19 mmol/(g cat) after 3 h irradiation of ultraviolet light.     

Preparation of Zn-doped TiO2 nanotubes electrode and its application in pentachlorophenol photoelectrocatalytic degradation

Zn-doped titanium oxide （TiO2） nanotubes electrode was prepared on a titanium plate by direct anodic oxidation and immersing method in sequence. Field emission scanning electron microscopy （FESEM） showed that the Zn-doped TiO2 nanotubes were well aligned and organized into high density uniform arrays with diameter ranging from 50 to 90 nm. The length and the thickness were about 200 and 15 nm respectively. TiO2 anatase phase was identified by X-ray diffraction （XRD）. X-ray photoelectronspectroscopy （XPS） indicated that Zn ions were mainly located on the surface of TiO2 nanotubes in form of ZnO clusters. Compared with TiO2 nanotubes electrode, about 20 nm red shift in the spectrum of UV-vis absorption was observed. The degradation of pentachlorophenol （PCP） in aqueous solution under the same condition （initial concentration of PCP： 20 mg/L; concentration of Na2SO4：0.01 mol/L and pH： 7.03） was carried out using Zn-doped TiO2 nanotubes electrode and TiO2 nanotubes electrode. The degradation rates of PCP using Zn-doped TiO2 nanotubes electrode were found to be twice and 5.8 times as high as that using TiO2 nanotubes electrode by UV radiation （400 μw/cm^2） and visible light radiation （4500 μw/cm^2）, respectively. 73.5% of PCP was removed using Zn-doped TiO2 nanotubes electrode against 45.5% removed using TiO2 nanotubes electrode in 120 min under UV radiation. While under visible light radiation, the degradation efficiency of PCP was 18.4% using Zn-doped TiO2 nanotubes electrode against 3.2% using TiO2 nanotubes electrode in 120 min. The optimum concentration of Zn doping was found to be 0.909%. The PCP degradation efficiencies of the 10 repeated experiments by Zn-doped TiO2 nanotubes electrode were rather stable with the deviation within 3.0%.     

Bionic titania coating carbon multi-layer material derived from natural leaf and its superior photocatalytic performance

Bionic titania coating carbon multi-layer material was fabricated by employing canna leaves as substrate and carbon precursor. Titania nanocrystals were assembled and coated on the natural films. The carbonation treatment under pure N_2 atmosphere yielded the ultrathin multi-film hybrid material. The carbon layer was coated with small anatase titania crystallite(8–10 nm) and possessed a highly specific surface area of 248.3 m~2 g~(-1). Examination using UV–visible spectrophotometer(UV–vis) showed that the band gap of the multi-layer material was reduced to 2.75 eV, and the hydrogen production by photocatalytic splitting of water under visible light irradiation was about 302 μmol g~(-1) after six hour.     

Photodegradation of <Emphasis Type="Italic">N</Emphasis>-nitrosodiethylamine in water with UV irradiation

The direct photolysis of N-nitrosodiethylamine （NDEA） in water with ultraviolet （UV） irradiation was investigated. Results showed that NDEA could be completely degraded under the direct UV irradiation. The effects of the experimental conditions, including the initial concentration of NDEA, humic acid and solution pH, were studied. The degradation products of NDEA were identified and quantified with gas chromatography-mass spectrometry （GC-MS） and high performance liquid chromatography （HPLC）. It was confirmed that methylamine （MA）, dimethylamine （DMA）, ethylamine （EA）, diethylamine （DEA）, NO2^- and NO3^- were the main degradation products. The photolysis degradation mechanism of NDEA was also discussed. As a result of N-N bond fission, NDEA was degraded by direct UV irradiation.     

Fluorescence and sensitization performance of phenylene-vinylene-substituted polythiophene

A new kind of polythiophene derivative, Poly(3-{2-[4-(2-ethylhexyloxy)-phenyl]-vinyl}-2,2′-bithiophene) (PTh), was applied in dye-sensitized solar cell to extend the light response of nanocrystalline TiO2 electrode. UV-vis absorption and fluorescence spectra were employed to investigate the interaction of PTh with nanocrystalline TiO2. The absorption coefficient of the PTh was high in visible part of spec- trum, and the fluorescence emission of the PTh can be efficiently quenched by TiO2 nanoparticles ow- i...     

Preparation and characterization of three-dimensionally ordered macroporous polystyrene <Emphasis Type="Italic">via</Emphasis> atom-transfer radical polymerization

Three-dimensionally ordered macroporous polystyrene （3DOM PS） with pore size of 350 nm was fab- ricated using Cp2Co/Ethyl 2-bromoisobutyrate （EBiB） catalytic system by ATRP. The resulting polymers were detected by FT-IR, 1H-NMR, SEM, and GPC. The microstructure of 3DOM PS was confirmed by FT-IR and 1H-NMR. SEM micrographs show that both silica spheres within the templates and pores in the 3DOM polystyrene are arranged in highly ordered fashion, and the shrinkage of the pores in the 3DOM PS is 24%. GPC curves show that the 3DOM PS possesses slightly lower Mn and narrow MWD compared with bulk one. This result indicats that living polymerization is different from non-living polymerizationin in the confined space.     

Binding of Euplotes octocarinatus centrin with target peptide melittin

Interactions between model target peptide melittin (ME) and Euplotes octocarinatus centrin (EoCen) were investigated by fluorescence spectra, circular dichroism (CD) spectra and native polyacrylamide gel electrophoresis (PAGE). In 0.1 mol/L N-2-hydroxyethylpiperazine-N-2-ethanesulfonic acid (Hepes) and 150 mmol/L NaCl at pH 7.4, EoCen and isolated short C-terminal domain of EoCen (SC-EoCen) form 1:1 peptide:protein complexes. However, no detectable signal changes can be observed while isolated N-terminal domain of EoCen (N-EoCen) or isolated long C-terminal domain of EoCen (LC-EoCen) was added into solution of ME. The interaction between EoCen and ME is specified exclusively for the short C-terminal domain of EoCen. On the basis of fluorescence titration curves, the conditional binding constants of ME with EoCen and SC-EoCen were calculated to be logKME-EoCen = 6.81±0.33 and log- KME-SC-EoCen = 6.51±0.45, respectively.     

Tunable multiple-channel filters based on photonic heterostructures using single-negative materials

We studied the multiple-channel filters based on photonic heterostructures consisting of single-negative permittivity and single-negative permeability media. The results showed that the number of resonance modes inside the zero-φeff gap increases as the number of heterogenous interface M increases. The number of resonance modes inside the zero-φeff, gap is equal to that of heterogenous interface M, and it can be used as M channels filter. This result provides a feasible method to adjust the channel number of multiple-channel filters. When losses are involved, the results showed that the electric fields of the resonance modes decay largely with the increase of the number of heterogenous interface and damping factors. Besides, the relationship between the quality factor of multiple-channel filters and the number of heterogenous interface M is linear, and the quality factor of multiple-channel filters decreases with the increase of the damping factor. These results provide feasible methods to adjust the quality factor of multiple-channel filters.     

Dead lithium phase investigation of Sn-Zn alloy as anode materials for lithium ion battery

In this work, based on First-principle plane wave pseudo-potential method, we have carried out an in-depth study on the possible dead lithium phase of Sn-Zn alloy as anode materials for lithium ion batteries. Through investigation, we found that the phases Li_xSn₄Zn₄(x = 2, 4, 6, 8) contributed to reversible capacity, while the phases Li_xSn₄Zn_8−(x−4)(x = 4.74, 7.72) led to capacity loss due to high formation energy, namely, they were the dead lithium phases during the charge/discharge process. And we come up with a new idea that stable lithium alloy phase with high lithiation formation energy (dead lithium phase) can also result in high loss of active lithium ion, besides the traditional expression that the formation of solid electrolyte interface film leads to high capacity loss. Supported by the National Natural Science Foundation of China (Grant No. 50771046), Natural Science Foundation of Guangdong Province (Grant No. 05200534), Key Projects of Guangdong Province and Guangzhou City (Grant Nos. 2006A10704003 and 2006Z3-D2031) and China Postdoctoral Science Foundation (Project No. 20080440764)     

Harmonic hexagonal superlattice pattern in a dielectric barrier discharge at atmospheric pressure

We report a harmonic hexagonal superlattice pattern in a dielectric barrier discharge in air/argon mixture at atmospheric pressure. The bifurcation scenario of harmonic hexagonal superlattice pattern with the applied voltage increasing is given. The phase diagram of the pattern types as a function of the applied voltage and the air-concentration is obtained. The hysteresis of pattern transitions at the upward and downward stage of the applied voltage is observed. The correlation measurements indicate that harmonic hexagonal superlattice pattern is an interleaving of two different transient sublattices. The spatial power spectrum demonstrates that harmonic hexagonal superlattice pattern has two separate wave vectors. Both small wave vector qh and big wave vector Kh, belong to the harmonic mode, and they obey a triad resonant interaction qh^1 ＋ qh^2 = Kh.     

Effects of the dispersed droplet sizes on the critical behavior of pseudobinary microemulsion

The critical behavior of pseudobinary microemulsion systems{water/sodium di(2-ethylhexyl)sulfo- succinate(AOT)/n-decane}with various droplet sizes was studied by measurements of refractive index. It was found that the critical exponentsβfor all systems approach 0.327 in a region sufficiently close to the critical temperature,which is consistent with 3D-Ising universality class.The critical temperatures linearly decrease as the dispersed droplet sizes increase.The critical amplitude almost linearly in- creases with increasing the dispersed droplet sizes.     

Fabrication of visible-light responsive S-F-codoped TiO<Subscript>2</Subscript> nanotubes

Fabrication and S-F-codoping of TiO2 nanotubes were carried out by a one-step electrochemical anodization process to extend the photoresponse of TiO2 to the visible-light region. The prepared samples were annealed in air and detected by SEM, XRD, XPS and UV-vis DRS spectrophotometer. The results showed that the average tube diameter of the nanotubes was 150 nm and the average tube length was 400 nm. The doped TiO2 nanotubes exhibited strong absorption in visible-light region. Photoelectrocatalytic degradation efficiency of 4-CP over S-F-codoped TiO2 nanotubes was 39.7% higher than that of only-F-doped sample. Moreover, sulfur and fluorine codoped into substitutional sites of TiO2 had been proven to be indispensable for strong response and high photocatalytic activity under visible light, as assessed by XPS.     

Study on elastic modulus of individual ferritin

The mechanical property of individual ferritin was measured with force-volume mapping (FV) under contact mode of atomic force microscopy (AFM) in this work. The elastic modulus of individual ferritin was estimated by the Hertz mode. The estimated value of the elastic modulus of individual ferritin was about 250－800 MPa under a small deformation. In addition, the elastic modulus of individual ferritin was compared with that of the colloid gold nanoparticle.     

Effect of the contact distance on transport properties of an orsanic molecular device

Using a spatially symmetric phenyldithiolate molecule sandwiched between two gold electrodes as model system and through shifting one electrode from symmetric contact site to form asymmetric contact, we investigated the properties of electronic transport in such a device by the first-principles. It was found that the/（G ）-V characteristics of a device show significant asymmetry and the magnitudes of current and conductance depend remarkably on the variation of molecule-metal distance at one of the two contacts. Namely, an asymmetric contact would lead to the weak rectifying effects on the current-voltage characteristics of a molecular device. The analysis shows that the HOMO is responsible for the resonant tunneling and its shift due to the charging of the device while the bias voltage is the intrinsic origin of asymmetric/（G）- Vcharacteristics.