| 动态电解机的研制 |
| |
| 引用本文： | 李成威,孙本良,卢艳青,徐阳.动态电解机的研制[J].鞍山科技大学学报,2003,26(5):366-368. |
| |
| 作者姓名： | 李成威 孙本良 卢艳青 徐阳 |
| |
| 作者单位： | 鞍山科技大学材料科学与工程学院 辽宁鞍山114044
(李成威，孙本良，卢艳青)，鞍山科技大学材料科学与工程学院 辽宁鞍山114044(徐阳) |
| |
| 摘 要： | 介绍了一种废旧硬质合金再生处理用的动态电解机．该电解机具有电解、球磨同时进行的功能，解决了选择性电解法处理废旧硬质舍金存在的阳极钝化问题和低钴合金难于电解的问题．与常规方法比较。生产效率提高5倍以上，成本降低30％-50％，产品质量完全达到甚至超过常规产品的水平,可以满足粉末冶金生产的要求．
|
| 关 键 词： | 废旧硬质合金 动态电解机 研制 选择性电解法 阳极钝化 |
| 文章编号： | 1672-4410(2003)05-0366-03 |
| 修稿时间： | 2003年9月4日 |
Manufacture of dynamic electrolysis machine |
| |
| LI Cheng_wei,SUN Ben_liang,LU Yan_qing,XU Yang.Manufacture of dynamic electrolysis machine[J].Journal of Anshan University of Science and Technology,2003,26(5):366-368. |
| |
| Authors: | LI Cheng_wei SUN Ben_liang LU Yan_qing XU Yang |
| |
| Abstract: | A kind of dynamic electrolysis machine used in treating the waste hard alloy was introduced in this paper.This machine can be used to electrolyze and grind simultaneously.There was some existent problems in the previous methods,such as the anode was easy to passivate,low Co alloy was difficult to electrolyze,and so on.These problems had been solved by using the present method.Compared with the conventional methods,the production efficiency of the present method is increased by more than 5 times,the cost is reduced by 30%-50%.The quality of the product is better than the others,and can meet the requirements for the productions of powder metallurgy. |
| |
| Keywords: | dynamic electrolysis waste hard alloy recovery regenertion |
| 本文献已被 CNKI 维普 等数据库收录！ |
