| 耦合相图计算的凝固过程显微偏析形成数值模拟 |
| |
| 引用本文： | 刘永刚,陈光,孙瑜,孙国雄.耦合相图计算的凝固过程显微偏析形成数值模拟[J].应用科学学报,2004,22(4):523-527. |
| |
| 作者姓名： | 刘永刚 陈光 孙瑜 孙国雄 |
| |
| 作者单位： | 1.南京理工大学材料科学与工程系 江苏南京 210094;2.东南大学机械系 江苏南京 210096 |
| |
| 基金项目： | 国家自然科学基金资助项目(59974011) |
| |
| 摘 要： | 建立了耦合热力学相图计算的显微偏析宏、微观模型并论述了其主要数值方法,以水冷铜型内冷却的Al-4.5%Cu合金铸锭为例仿真了其凝固过程中显微偏析的形成,并与试验结果进行了对照,获得了与试验结果吻合较好的模拟结果,验证了模型和算法的正确性.
|
| 关 键 词： | 相图计算 显微偏析 数值模拟 耦合 |
| 文章编号： | 0255-8297(2004)04-0523-05 |
| 收稿时间： | 2003-08-16 |
| 修稿时间： | 2003-10-31 |
The Simulation of the Forming of Microsegregaiton During Solidification Process in the Calculation of Coupling Phase Diagrams |
| |
| LIU Yong-gang,CHEN Guang,SUN Yu,SUN Guo-xiong.The Simulation of the Forming of Microsegregaiton During Solidification Process in the Calculation of Coupling Phase Diagrams[J].Journal of Applied Sciences,2004,22(4):523-527. |
| |
| Authors: | LIU Yong-gang CHEN Guang SUN Yu SUN Guo-xiong |
| |
| Institution: | 1. Department of Materials Science and Engineering, Nanjing University of Science and Technology, Nanjing 210094, China;2. Department of Mechanical Engineering, Southeast University, Nanjing 210096, China |
| |
| Abstract: | Macro- and micro- models of microsegregation simulation are suggested and the primary numerical methods are discussed at the same time. As an example, microsegregation simulation of Al-4.5%Cu binary alloy in water-cooled Cu mould is also presented. The comparison of simulation results and experiments indicates that these two results were in complete agreement. This verifies the validity and the applicability of the models and the numerical methods. |
| |
| Keywords: | calculation of phase diagrams microsegregation simulation coupling |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《应用科学学报》浏览原始摘要信息 |
| 点击此处可从《应用科学学报》下载免费的PDF全文 |
