首页 | 本学科首页   官方微博 | 高级检索  
     检索      

抗滑移系数对框架中钢梁高强度螺栓拼接性能的影响研究
引用本文:李启才,顾强.抗滑移系数对框架中钢梁高强度螺栓拼接性能的影响研究[J].西安科技大学学报,2007,27(1):43-49.
作者姓名:李启才  顾强
作者单位:苏州科技学院,土木工程系,江苏省结构工程重点实验室,江苏,苏州,215011
摘    要:抗滑移系数是高强螺栓摩擦型连接中的一个重要参数。本文对框架中高强螺栓拼接采用不同抗滑移系数时的性能,以及接触面的抗滑移系数大于和小于设计值时的性能,进行了单调荷载和循环荷载作用下的研究。结论表明:采用不同抗滑移系数设计的拼接节点,其性能差别很小,在设计时可不予考虑;接触面抗滑移系数大于或小于设计值,将直接导致拼接区的滑移出现和耗能性能的不同,但对拼接的极限承载能力并无影响。

关 键 词:抗滑移系数  钢梁拼接  高强螺栓摩擦型连接  框架结构
文章编号:1672-9315(2007)01-0043-06
修稿时间:2006年3月7日

Effect of slipping coefficient on splicing of high-strength bolts on steel beam in moment-resisting frame
LI Qi-cai,GU Qiang.Effect of slipping coefficient on splicing of high-strength bolts on steel beam in moment-resisting frame[J].JOurnal of XI’an University of Science and Technology,2007,27(1):43-49.
Authors:LI Qi-cai  GU Qiang
Abstract:Slipping coefficient(SC) is an important factor in high-strength bolt slip-critical connection.The modeling of high-strength bolt splice in frame structure under both mono-and cyclic-loading,with different SC and SC higher or lower than designed value,is studied.Results show that performance of splice joints with different SC differ very lightly,while SC higher or lower than designed value will lead directly to different slipping appearing time and energy-dissipation,but do not affect the ultimate load-carrying capacity of splice joint.
Keywords:slipping coefficient  steel beam splicing  high-strength bolts  frame structure  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号