| 混流式水轮机进水管蝶阀活门裂纹分析 |
| |
| 引用本文： | 李建伟,钟苏,王治国,庞立军,贾伟.混流式水轮机进水管蝶阀活门裂纹分析[J].河海大学学报(自然科学版),2014,42(5):451-454. |
| |
| 作者姓名： | 李建伟 钟苏 王治国 庞立军 贾伟 |
| |
| 作者单位： | 1. 哈尔滨大电机研究所强度与振动研究室，黑龙江 哈尔滨 150040; 水力发电设备国家重点实验室，黑龙江 哈尔滨 150040
2. 哈尔滨大电机研究所强度与振动研究室,黑龙江 哈尔滨,150040 |
| |
| 基金项目： | “十二五”国家科技支撑计划 |
| |
| 摘 要： | 为探讨某电站水轮机进水管蝶阀活门筋板开裂的原因，利用ANSYS有限元软件，分别对蝶阀活门的强度及振动特性进行计算和分析。强度分析结果显示40 mm筋板位置的应力水平很低，筋板的开裂并非是应力过高造成的；蝶阀活门、筋板及盖板的模态分析表明，蝶阀活门的40 mm筋板及90 mm盖板出现了卡门涡。结合有限元分析结果，对电站蝶阀活门进行现场结构模态测试，测试结果与计算结果吻合。分析结果表明，该电站蝶阀活门出现的裂纹是由卡门涡引起的。
|
| 关 键 词： | 蝶阀活门 水轮机结构裂纹 卡门涡 结构强度 |
| 收稿时间： | 2013/6/7 0:00:00 |
| 修稿时间： | 2014/9/25 0:00:00 |
Analysis of cracks in butterfly valve of Francis turbine |
| |
| LI Jianwei,ZHONG Su,WANG Zhiguo,PANG Lijun and JIA Wei.Analysis of cracks in butterfly valve of Francis turbine[J].Journal of Hohai University (Natural Sciences ),2014,42(5):451-454. |
| |
| Authors: | LI Jianwei ZHONG Su WANG Zhiguo PANG Lijun and JIA Wei |
| |
| Institution: | Strength and Vibration Research Department, Harbin Institute of Large Electrical Machinery, Harbin 150040, China; State Key Laboratory of Hydropower Equipment, Harbin Institute of Large Electrical Machinery, Harbin 150040, China,Strength and Vibration Research Department, Harbin Institute of Large Electrical Machinery, Harbin 150040, China,Strength and Vibration Research Department, Harbin Institute of Large Electrical Machinery, Harbin 150040, China,Strength and Vibration Research Department, Harbin Institute of Large Electrical Machinery, Harbin 150040, China and Strength and Vibration Research Department, Harbin Institute of Large Electrical Machinery, Harbin 150040, China |
| |
| Abstract: | In order to explore the causes of the butterfly valve rib plate cracking of a turbine at a hydropower station, we calculated and anlayzed the strength and the vibration properties of the butterfly valve using the finite element software ANSYS. The strength analysis results show that the stress level of a 40-mm rib plate is very low. Obviously, high stress is not the reason for rib plate cracking. The results of modeling analysis show that the Karman vortices occurred at a 40-mm rib plate and a 90-mm cover plate. Referring to the results of FEM analysis, we conducted a site test for the butterfly valve at the hydropower station. The experimental results agreed with the calculated results. Hence, the cracks in the butterfly valve were caused by the Karman vortices. |
| |
| Keywords: | butterfly valve turbine structural crack Karman vortices structural strength |
| 本文献已被 万方数据 等数据库收录！ |
| 点击此处可从《河海大学学报(自然科学版)》浏览原始摘要信息 |
| 点击此处可从《河海大学学报(自然科学版)》下载免费的PDF全文 |
|
