首页 | 本学科首页   官方微博 | 高级检索  
     检索      

升平油田葡萄花油层最佳提液速度室内实验研究
引用本文:周志军,时刚,黄泽明,杨轩宇.升平油田葡萄花油层最佳提液速度室内实验研究[J].齐齐哈尔大学学报(自然科学版),2013(2):1-5.
作者姓名:周志军  时刚  黄泽明  杨轩宇
作者单位:东北石油大学提高油气采收率教育部重点实验室;东北石油大学非常规油气成藏与开发省部共建国家重点实验室培育基地;大庆油田有限责任公司第一采油厂;中国石油大学(北京)石油与天然气工程学院
基金项目:国家自然科学基金(50634020,50874023);国家重大专项(2011ZX05052-12,2011ZX05010-002-05);黑龙江省提高油气采收率原理与技术高校科技创新团队建设计划资助(2009td08);黑龙江省科技计划项目(GZ09A121);黑龙江省教育厅科学技术研究项目(12521044,12521052)
摘    要:为了进一步探索升平油田葡萄花油层提液对驱油效率的影响及作用,确定最佳提液速度,选取不同渗透率级别、变异系数的人造岩心进行室内物理模拟实验,研究不同注入速度、不同注入PV数、不同渗透率级别、不同注入时机及非均质性对驱油效率的影响,为确定升平油田葡萄花油层最佳提液速度提供理论依据。实验结果表明:对于不同渗透率级别的人造均质岩心,驱替速度均为25mL/h时采收率最高;在不同驱替速度,同一渗透率的条件下,最佳注入PV数界限为0.4。对于渗透率变异系数在0.5~0.85之间的非均质人造岩心驱替速度为20mL/h时,采收率最高;在渗透率为300md变异系数为0.5和渗透率为200md变异系数为0.65的非均质岩心中,当驱替速度为20mL/h时,最佳注入PV数界限为0.3,其他的驱替速度情况下,最佳注入PV数的界限为0.2。而在渗透率为200 md变异系数为0.85的非均质岩心中,最佳注入PV数界限为0.3。

关 键 词:升平油田  葡萄花油层  提液速度  物理模拟  驱油效率

The indoor experimental study of best carry liquid speed at putaohua layer on shengping oil field
ZHOU Zhi-jun,SHI Gang,HUANG Ze-ming,YANG Xuan-yu.The indoor experimental study of best carry liquid speed at putaohua layer on shengping oil field[J].Journal of Qiqihar University(Natural Science Edition),2013(2):1-5.
Authors:ZHOU Zhi-jun  SHI Gang  HUANG Ze-ming  YANG Xuan-yu
Institution:1.Northeast Petroleum University,Key Laboratory of Education of China on Enhanced Oil and Gas Recovery,Heilongjiang Daqing 163318,China;2.Northeast Petroleum University,Accumulation and Development of Unconventional Oil and Gas,State Key Laboratory Cultivation Base Jointly-constructed by Province and the Ministry of Science and Technology,Heilongjiang Daqing 163318,China;3.No.1 Oil Production Company of Daqing Oilfield Company Ltd.,Heilongjiang Daqing 163001,China;4.Oil and Gas Engineering Institute,China university of petroleum(Beijing),Beijing 102200,China)
Abstract:In order to explore the influence and function of putaohua reservoir liquid oil carry oil displacement efficiency on shengping oil field,to determine the best carry liquid speed,we select the different level,variation coefficient of permeability artificial core indoor physical simulation experiment to study different injection rate and injection,the number of different PV different levels,and different permeability timing and into the heterogeneity impact on oil displacement efficiency,to determine the best wine putaohua reservoir of oil field carry liquid speed to provide the theory basis.The experiment results show that the different levels of the permeability artificial homogeneous core,flooding are 25mL/h for speed when it is highest recovery;In different flooding for speed,the same permeability,in the condition the best number is 0.4 PV into line.For the permeability coefficient of variation in the range of 0.5 to 0.85 of heterogeneous artificial core,displacement for 20mL for speed/h is the highest recovery;In the heterogeneous cores of permeability for 300md with 0.5 variation coefficient and permeability for 200md with 0.6 variation coefficient,when flooding is 20mL/h for speed,best into several boundaries is 0.3 PV,and on other flooding for speed,the number of best PV boundaries is 0.2.And in the heterogeneity core of permeability for 200md with 0.85 variation coefficient,the best boundary number is 0.3 PV.
Keywords:shengping oil field  putaohua layer  carry liquid speed  physical simulation  oil displacement efficiency
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号