| EBM成型TC4钛合金研究进展 |
| |
| 引用本文： | 苗普,李强,潘登. EBM成型TC4钛合金研究进展[J]. 上海理工大学学报, 2019, 40(6): 41-46 |
| |
| 作者姓名： | 苗普 李强 潘登 |
| |
| 作者单位： | 上海理工大学 机械工程学院, 上海 200093,上海理工大学 机械工程学院, 上海 200093,上海理工大学 机械工程学院, 上海 200093 |
| |
| 基金项目： | 上海市自然科学基金资助项目（15ZR1428400）；上海市科技支撑计划资助项目（16060502400） |
| |
| 摘 要： | 电子束熔化成型技术（electron beam melting，EBM）是3D打印的代表性技术之一，特别适合传统工艺不易加工的Ti-6Al-4V合金（TC4钛合金）的快速成型，目前在航空航天、化工、生物医疗等领域展示出巨大的应用前景。从EBM的原理出发，综述了EBM制备TC4钛合金的显微组织、缺陷以及力学性能。分析了受成型工艺参数和成型件位置等因素影响的冷却速度的变化所导致的TC4钛合金的显微组织发生变化；并指出了导致TC4钛合金出现缺陷的主要原因。EBM成型TC4钛合金的拉伸性能已与锻造TC4钛合金相当，其较低的疲劳强度可以通过热等静压处理提高。
|
| 关 键 词： | 电子束熔化成型 TC4钛合金 显微组织 缺陷 力学性能 |
| 收稿时间： | 2019-04-12 |
Research Progress of TC4 Titanium Alloy by Electron Beam Melting |
| |
| MIAO Pu,LI Qiang and PAN Deng. Research Progress of TC4 Titanium Alloy by Electron Beam Melting[J]. Journal of University of Shanghai For Science and Technology, 2019, 40(6): 41-46 |
| |
| Authors: | MIAO Pu LI Qiang PAN Deng |
| |
| Affiliation: | School of Mechanical Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China,School of Mechanical Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China and School of Mechanical Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China |
| |
| Abstract: | Electron beam melting (EBM), a representative technology of 3D printing, suitable for the rapid prototyping of Ti-6Al-4V alloy (TC4 titanium alloy), which is not easily manufactured with traditional fabrication technology. Recently, EBM shows great prospect in aerospace, chemical industry, medical implants and other areas. The present paper introduces principles of EBM, the microstructure, defects and mechanical properties of the EBM TC4 titanium alloy were reviewed. The microstructure changes of TC4 titanium alloy caused by the change of cooling rate affected by the molding process parameters and the position of the molded part were analyzed. The main causes of defects in TC4 titanium alloy were pointed out. Both microstructure and defects affect the mechanical properties of EBM TC4 titanium alloys.The tensile properties of EBM TC4 titanium alloys are comparable to those of forged TC4 titanium alloys, and the lower fatigue strength can be enhanced by hot isostatic pressing. |
| |
| Keywords: | electron beam melting (EBM) TC4 titanium alloy microstructure defect mechanical property |
|
| 点击此处可从《上海理工大学学报》浏览原始摘要信息 |
|
点击此处可从《上海理工大学学报》下载全文 |
|
