首页 | 本学科首页   官方微博 | 高级检索  
     检索      

添加剂对锰锌铁氧体纳米晶水热制备的影响
引用本文:桑商斌,古映莹,唐爱东,黄可龙.添加剂对锰锌铁氧体纳米晶水热制备的影响[J].中南大学学报(自然科学版),2000,31(4):327-329.
作者姓名:桑商斌  古映莹  唐爱东  黄可龙
作者单位:中南大学 化学化工学院,湖南 长沙 410083
摘    要:均匀的共沉淀前驱体是通过水热法制备单相锰锌铁氧体的前提.通过加入添加剂,制备了无杂相、团聚程度低、结晶度完好、粒度分布窄、粒径为10~20nm的单相以及具有较好磁性能的锰锌铁氧体纳米晶.此外,对产物进行了热稳定性研究,结果表明其具有良好的烧结活性,烧结温度在空气中为870℃,在氩气中为1150℃.

关 键 词:锰锌铁氧体纳米晶  水热法  添加剂
文章编号:1005-9792(2000)04-
修稿时间:1999年10月29

The effect of additives on hydrothermal preparation of nanometer Mn, Zn ferrite particles
SANG Shang-bin,GU Ying-ying,TANG Ai-dong,HUANG Ke-long.The effect of additives on hydrothermal preparation of nanometer Mn, Zn ferrite particles[J].Journal of Central South University:Science and Technology,2000,31(4):327-329.
Authors:SANG Shang-bin  GU Ying-ying  TANG Ai-dong  HUANG Ke-long
Abstract:The effect of additives on the hydrothermal preparation process was studied in this paper. The homogeneouscoprecipitation precursors was the precondition of acquiring a single phase MnZn ferrite by hydrothermal mathod. Thepure, aggregate-free nanometer MnZn ferrite crystallites of good megnetic property were obtained with a size of 10~20 nmand a narrow grain size distribution by additives. The thermal stability study shows that the product has a good sinteringactivity. The sintering temperature is 870℃ in air and 1 150℃ in Ar.
Keywords:nanometer Mn and Zn ferrite crystallite  hydrothemal mothod  additives
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号