| 棒材热连轧椭圆-圆孔型应变分布的有限元模拟 |
| |
| 引用本文： | 宋卓斐 张国滨. 棒材热连轧椭圆-圆孔型应变分布的有限元模拟[J]. 河北理工学院学报, 2005, 27(4): 36-40 |
| |
| 作者姓名： | 宋卓斐 张国滨 |
| |
| 作者单位： | 河北理工大学冶金与能源学院,河北唐山063009 |
| |
| 摘 要： | 采用大变形弹塑性有限元法的显式动力学模块（ANSYS／LS—DYNA）对棒材热连轧时椭圆-圆孔型的应变场进行了有限元模拟。得到的应变分布规律，无论是“椭进圆”还是“圆进椭”均与理论结果一致，这表明利用ANSYS／LS—DYNA求解孔型中轧制的三维变形问题可为提高产品的尺寸精度提供设计依据；轧件头尾两端不但变形剧烈，而且变形不均严重，这是刚塑性交界面及外端的影响所致；利用有限元法求解椭圆-圆孔型中的三维变形问题可清楚地显示出轧件在孔型中金属的流动状态，这对提高棒材热连轧的稳定性具有重要的参考价值。
|
| 关 键 词： | 椭圆-圆孔型 棒材热连轧 显式动力学：有限元模拟 应变分布 |
| 文章编号： | 1007-2829（2005）04-0036-05 |
| 收稿时间： | 2005-03-20 |
| 修稿时间： | 2005-03-20 |
The Simulation for Distribution of Strain of Hot Continuous Bar Rolling in Oval- round Groove |
| |
| SONG Zhuo-fei ,ZHANG Guo-bin. The Simulation for Distribution of Strain of Hot Continuous Bar Rolling in Oval- round Groove[J]. Journal of Hebei Institute of Technology, 2005, 27(4): 36-40 |
| |
| Authors: | SONG Zhuo-fei ZHANG Guo-bin |
| |
| Affiliation: | College of Metallurgy and Energy in Hebei Polytechnic University ,Tangshan Hebei 063009 ,China |
| |
| Abstract: | The strain for hot continuous bar rolling is overcomed with ANSYS/LS-DYNA. Geting the rule of strain, the results agree with the theory value. So it can provide reference for improving the dimension precision of productions by solving three-dimensional deformation in oval-round pass with ANSYS/LS-DYNA; The deformation is acute and odds in the head and end of roiling pieces, it is because the effect of rigid-plastic interface and outer end ; It can show clearly the steel flowing in groove, which is important for improving the stability of hot continuous bar rolling. |
| |
| Keywords: | oval-round groore hot continuoud bar rolling ANSYS/LS-DYNA FEM analysis distribution of strain |
| 本文献已被 维普 等数据库收录！ |
