| 基于正交试验的轿车前门三角块最佳注射工艺参数的研究 |
| |
| 引用本文： | 吴亮发,孙宇峰,周超群,孟祥磊.基于正交试验的轿车前门三角块最佳注射工艺参数的研究[J].新乡学院学报(自然科学版),2013(2):136-138. |
| |
| 作者姓名： | 吴亮发 孙宇峰 周超群 孟祥磊 |
| |
| 作者单位： | 1. 安徽工程大学 机械与汽车学院,安徽 芜湖 241000
2. 芜湖恒信汽车内饰制造有限公司,安徽 芜湖 241009 |
| |
| 摘 要： | 以轿车前门三角块为研究对象,首先采用Moldflow软件及正交试验方法对其进行模拟试模试验,其次用极差分析法对其结果进行分析,最终得到最佳注射工艺参数组合;同时研究了多指标注射工艺参数对多评价指标的影响.
|
| 关 键 词： | 轿车前门三角块 Moldflow 正交试验 极差分析 多指标 |
Study on the Best Injection Molding Process Parameters of Car Front Door Triangular Block Based on Orthogonal Experiment |
| |
| Authors: | WU Liang-fa SUN Yu-feng ZHOU Chao-qun MENG Xiang-lei |
| |
| Institution: | 1. School of Mechanical and Automotive Engineering, Anhui Polytechnic University, Wuhu 241000, China 2. Wuhu Hengxin Auto Interior Trim Company Limited, Wuhu 241009, China) |
| |
| Abstract: | Taking car front triangle as the research object, molding trial production simulation test is done firstly with software Moldflow, using orthogonal test method. The results are analyzed by range analysis secondly. And the best injection process parameters combination is obtained finally. Meanwhile, the influences of multi-index injection technological parameters on the multi- index evaluation are studied. |
| |
| Keywords: | the front door triangle block Moldflow orthogonal experiment range analysis multi-index |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
