首页 | 本学科首页   官方微博 | 高级检索  
     

氧化处理工艺对无缝钢管顶头性能的影响
引用本文:宋慧瑾,邓祥丰,鄢强,向长奎,何敏. 氧化处理工艺对无缝钢管顶头性能的影响[J]. 成都大学学报(自然科学版), 2020, 0(2): 194-198
作者姓名:宋慧瑾  邓祥丰  鄢强  向长奎  何敏
作者单位:1.成都大学机械工程学院
基金项目:四川省粉末冶金重点实验室研究计划(SC-FMYJ2019-06);四川省教育厅青年科研重点课题(17ZA0094)。
摘    要:对无缝钢管顶头20CrNi3A钢在水蒸气气氛下进行氧化,采用X射线衍射分析、金相分析和硬度测试等方法,对20CrNi3A钢表面氧化膜的氧化动力学规律、组织形貌和力学性能变化进行研究.结果表明:20CrNi3A钢的氧化动力学曲线与金属氧化动力学曲线规律相符;在同一氧化时间下,随着氧化温度的增高,氧化膜的厚度逐渐变大;当氧化温度为900℃、氧化时间为8 h时,氧化膜厚度最大,硬度最佳.

关 键 词:20CrNi3A钢  氧化处理  氧化膜  组织形貌  力学性能

Influence of Oxidation on Performance of Top of Seamless Steel Tube
SONG Huijin,DENG Xiangfeng,YAN Qiang,XIANG Changkui,HE Min. Influence of Oxidation on Performance of Top of Seamless Steel Tube[J]. Journal of Chengdu University (Natural Science), 2020, 0(2): 194-198
Authors:SONG Huijin  DENG Xiangfeng  YAN Qiang  XIANG Changkui  HE Min
Affiliation:(School of Mechanical Engineering,Chengdu University,Chengdu 610106,China)
Abstract:The seamless steel tube head 20CrNi3A steel is oxidized in the water vapor atmosphere.The oxidation kinetics,microstructure and mechanical properties of the surface oxide film of 20CrNi3A steel are studied by XRD,metallographic analysis and hardness test.The results show that the oxidation kinetics curve of 20CrNi3A steel is consistent with the metal oxidation kinetic curve.The thickness of the overall oxide film gradually increases with the increase of the oxidation temperature and the extension of time.Thickness of the oxide film reaches its largest scale and the hardness reaches its best level with oxidation temperature of 900℃for 8 h.
Keywords:20CrNi3A steel  oxidation treatment  oxidation film  morphology  mechanical property
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号