| 碳化硅颗粒级配优化的理论与实验研究 |
| |
| 引用本文： | 李小池,王涛,朱海马. 碳化硅颗粒级配优化的理论与实验研究[J]. 西安科技大学学报, 2012, 32(4): 509-513 |
| |
| 作者姓名： | 李小池 王涛 朱海马 |
| |
| 作者单位： | 西安科技大学材料科学与工程学院,陕西西安,710054 |
| |
| 基金项目： | 国家发改委重点研究项目 |
| |
| 摘 要： | 运用堆积颗粒的颗粒级配优化模型,计算了碳化硅制品工业生产中使用原料常用的3种粒径的最优配比,同时通过3种粒径碳化硅颗粒的粉体堆积密度和压实密度的实验,获得了最优堆积密度和压实密度,对比验证了理论模型的计算结果。实验结果表明不同颗粒级配的堆积密度和压实密度的最优配比,与最优理论模型基本相符合。实验研究发现当粗中细3种颗粒粒度的最优化配比百分数为:63∶9.7∶26.8时,粉体自由堆积密度与压实密度达到最大。
|
| 关 键 词： | 碳化硅原料 颗粒级配 堆积密度 生坯密度 |
Theory calculation and experiment verification of silicon carbide particle grading optimization |
| |
| LI Xiao-chi , WANG Tao , ZHU Hai-ma. Theory calculation and experiment verification of silicon carbide particle grading optimization[J]. JOurnal of XI’an University of Science and Technology, 2012, 32(4): 509-513 |
| |
| Authors: | LI Xiao-chi WANG Tao ZHU Hai-ma |
| |
| Affiliation: | (College of Materials Science and Engineering ,Xi＇an University of Science and Technology, Xi＇an 710054, China) |
| |
| Abstract: | Three most optimal match has been calculated by grain composition optimized model in the system of packing particle, the most optimized bulk density and packing density have been acquired by the experiment of three grain size silicon carbide panicles, and the calculation results of the theory model have been compared. The result shows： the most optimization of different particle grading and packing density is according with the theory model, and the particle bulk density and packing density are maximum when the particle grading is 70： 10： 20. |
| |
| Keywords: | silicon carbide particle grading packing density green body density |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
