首页 | 本学科首页   官方微博 | 高级检索  
     检索      

烧结过程铁酸钙的生成速度
引用本文:杜鹤桂,郭兴敏.烧结过程铁酸钙的生成速度[J].东北大学学报(自然科学版),1992(1).
作者姓名:杜鹤桂  郭兴敏
作者单位:东北工学院钢铁冶金系 (杜鹤桂),东北工学院钢铁冶金系(郭兴敏)
摘    要:试验研究表明,铁矿石烧结过程中铁酸钙生成速度主要由反应温度所决定。一般情况下,铁酸钙生成量随时间的增长和温度的升高而增多。在模拟鞍钢原料有 SiO_2等组分条件下,铁酸钙生成量在高温烧结后期有所下降。通过试验得出在不同条件下的铁酸钙生成量和烧结时间的定量关系。烧结料配碳量增加,铁酸钙生成量减少。

关 键 词:烧结过程  反应速度  矿相组成  铁酸钙  电子探针

Rate of Calcium Ferrite Formation in Sintering Process
Du Hegui,Guo Xinmin.Rate of Calcium Ferrite Formation in Sintering Process[J].Journal of Northeastern University(Natural Science),1992(1).
Authors:Du Hegui  Guo Xinmin
Institution:Du Hegui;Guo Xinmin
Abstract:As shown in experimental results, the rate of calcium ferrite formation insintering process depends mainly on the reacting temperature.Generally,theamount of formed calcium ferrite increases with the sintering duration andtemperature. In a high-temperature sintering process for which the raw ma-terials used were analog to those sinter mixture prepared in Anshan Iron andSteel Co., the amount of formed calcium ferrite showed being decreased some-what at the later stage. As a result, the relationships between formed cal-cium ferrite and sintering duration under different conditions obtained quan-titatively.It is also found that the amount of formed calcium ferrite decreaseswith the increasing carbon content in sinter mixture.
Keywords:sintering process  rate of reaction  mineral constituent  calcium ferrite  electron probe  
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号