Research on a toolpath generation method of NC milling based on space-filling curve |
| |
Authors: | Sui Xiulin Chen Xiaoqi Ge Jianghua Jiao Yan |
| |
Institution: | Department of Mechanical and Power Engineering, Harbin University of Science and Technology, Harbin 150080, P.R.China |
| |
Abstract: | Tool path generated by space-filling curve always turns frequently causing trembling to ma-chine, reducing toollife and affecting workpiece quality.Length and generation time of tool paths are both relatively long.In order to solve these problems, a toolpath generation method of NC milling based on space-filling curve is proposed.First, T-spline surface is regarded as the modeling sur-face, the grid, which is based on the limited scallop-height, can be got in the parameter space, and the influence value of grid node is determined.Second, a box is defined and planned, and the tool paths are got preliminarily,which is based on minimal spanning tree;Finally, based on an improved chamfering algorithm, the whole tool paths are got.A simulation system is developed for computer simulation, and an experiment is carried out to verify the method.The results of simulation and ex-periment show that the method is effective and feasible, and length and time of the tool paths are re-duced. |
| |
Keywords: | space-filling curve toolpath generation method NC milling T-spline surface minimal spanning tree |
本文献已被 CNKI 万方数据 等数据库收录! |
|