| CO2气体保护焊温度场的数值模拟 |
| |
| 引用本文： | 郑振太,单平,罗震,唐新新,魏欣伟,杨敬雷.CO2气体保护焊温度场的数值模拟[J].天津大学学报(自然科学与工程技术版),2007,40(2):234-238. |
| |
| 作者姓名： | 郑振太 单平 罗震 唐新新 魏欣伟 杨敬雷 |
| |
| 作者单位： | [1]天津大学材料科学与工程学院,天津300072 [2]河北工业大学材料科学与工程学院,天津300130 |
| |
| 摘 要： | 为了研究强制对流对气体保护焊温度场的影响，通过红外热像仪检测了CO2气体保护焊的温度场，发现在熔池及其邻近区域温度呈圆锥型分布．在此实验结果的基础上，确定了2．0mm的高斯热源热流分布参数．在详细分析多种对流边界条件下，通过ANSYS对有强制对流效果的气体保护焊温度场进行了数值模拟．确定了适用于有强制对流效果的气体保护焊的对流边界条件计算公式．对焊接温度场的峰值温度和t8/5等参数的实验结果与模拟结果对比分析表明，强制对流边界条件是气体保护焊温度场尤其是近缝区温度分布数值模拟的关键因素之一．
|
| 关 键 词： | 气体保护焊 红外成像 焊接温度场 数值模拟 强制对流 |
| 文章编号： | 0493-2137（2007）02-0234-05 |
| 修稿时间： | 2006-05-182006-09-28 |
Numerical Simulation of CO2 Arc Welding Temperature Field |
| |
| ZHENG Zhen-tai,SHAN Ping,LUO Zhen,TANG Xin-xin,WEI Xin-wei,YANG Jing-lei.Numerical Simulation of CO2 Arc Welding Temperature Field[J].Journal of Tianjin University(Science and Technology),2007,40(2):234-238. |
| |
| Authors: | ZHENG Zhen-tai SHAN Ping LUO Zhen TANG Xin-xin WEI Xin-wei YANG Jing-lei |
| |
| Institution: | 1. School of Material Science and Engineering, Tianjin University, Tianjin 300072, China; 2. School of Material Science and Engineering, Hebei University of Technology, Tianjin 300130, China |
| |
| Abstract: | To reveal the influence of forced convection on gas shielded arc welding temperature field, the infrared camera was used to investigate the temperature field of the base metal in CO2 arc welding. It was found that temperature distribution of the weld pool and adjacent area displayed cone shape. Based on the experimental resuit, the 2.0 mm heat flux distribution parameter of Gauss heat source was determined. And according to analy- sis of several convection boundary conditions using finite element method, the temperature field of gas shielded arc welding with forced convection was simulated. Moreover, the formulae were determined to calculate the convection boundary condition of the gas shielded arc welding with forced convection. The comparison was made between the experimental results and the simulation results of parameters including the peak temperature and t8/5 of the temperature field, showing that the correct boundary condition of forced convection is one of the key elements to simulate the temperature field of the gas shielded arc welding, especially temperature distribution around the weld pool. |
| |
| Keywords: | gas shielded arc welding infrared imaging welding temperature field numerical simulation forced convection |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
