首页 | 本学科首页   官方微博 | 高级检索  
     检索      

全螺旋灌注桩单桩极限承载力的预测
引用本文:胡焕校,刘静,祝世平.全螺旋灌注桩单桩极限承载力的预测[J].中南大学学报(自然科学版),2007,38(6):1239-1244.
作者姓名:胡焕校  刘静  祝世平
作者单位:中南大学地学与环境工程学院 湖南长沙410083(胡焕校),中南大学土木建筑学院 湖南长沙410083(刘静),湖北中南勘察基础工程有限公司 湖北武汉430081(祝世平)
基金项目:中国冶金地质总局计划资助项目
摘    要:根据6根全螺旋灌注桩的实测桩顶载荷-桩顶沉降(Q-s)曲线,用双曲线法预测全螺旋灌注桩的极限承载力。研究结果表明:在极限加载范围内,用双曲线法能较好地预测全螺旋灌注桩的单桩极限承载力,拟合曲线与实测的曲线比较吻合且预测的结果偏于安全,预测结果的偏差与地层情况关系不大。

关 键 词:双曲线法  全螺旋灌注桩  单桩极限承载力
文章编号:1672-7207(2007)06-1239-06
修稿时间:2007年3月5日

Prediction of single ultimate bearing capacity of screwed casting pile
HU Huan-xiao,LIU Jing,ZHU Shi-ping.Prediction of single ultimate bearing capacity of screwed casting pile[J].Journal of Central South University:Science and Technology,2007,38(6):1239-1244.
Authors:HU Huan-xiao  LIU Jing  ZHU Shi-ping
Abstract:The ultimate bearing capacity of the single screwed pile was predicted based on the six piles with screws from four different sites by hyperbola method.The results show that the predicted curve is in good agreement with the field measurement curve below ultimate load,and tends to be safe.The deviation from prediction result to measured result is not closely connected with subterranean formation.
Keywords:hyperbola method  the pile with screws  ultimate bearing capacity of single pile
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号