| 基于虚拟样机技术的宽幅数字喷墨打印机协同仿真研究 |
| |
| 引用本文： | 廖强,张衡.基于虚拟样机技术的宽幅数字喷墨打印机协同仿真研究[J].世界科技研究与发展,2012,34(1):126-129. |
| |
| 作者姓名： | 廖强 张衡 |
| |
| 作者单位： | 1. 重庆大学机械传动国家重点实验室,重庆400044;重庆大学机械工程学院,重庆400044
2. 重庆大学机械工程学院,重庆,400044 |
| |
| 基金项目： | 重庆市科技攻关计划基金 |
| |
| 摘 要： | 针对宽幅数字喷墨打印机设计要求,基于ADAMS和MATLAB,联合建立了打印机协同仿真虚拟样机模型.对比试验显示喷印头速度误差在0.8％以内,吻合度较好.结果表明,该方法有效可行,为打印机的优化、样机的试制,提供了技术依据和现代化方法.
|
| 关 键 词： | 宽幅数字喷墨打印机 虚拟样机 协同仿真 速度误差 |
Co-simulation of Wide-format Digital Inkjet Printer Based on Virtual Prototype Technology |
| |
| LIAO Qiang
,
ZHANG Heng.Co-simulation of Wide-format Digital Inkjet Printer Based on Virtual Prototype Technology[J].World Sci-tech R & D,2012,34(1):126-129. |
| |
| Authors: | LIAO Qiang ZHANG Heng |
| |
| Institution: | 2 ( 1. The State Key Laboratory of Mechanical Transmission, Chongqing University, Chongqing 400044 ; 2. College of Mechanical Engineering, Chongqing University, Chongqing 400044 ) |
| |
| Abstract: | For the design requirements, the wide-format digital inkjet printer＇s co-simulation model is built, based on virtual prototype technology with ADAMS ＆ MATLAB. Carried out co-simulation studies in different conditions, and compared with the physical prototype experiments, the results show that speed error of the printer in running-is less than 0.8% ,consistent with the physical prototype experiments. The results also prove that co=simulation method is feasible and effeetive,thus,a modern way for the design,improvement and optimization of the wide-format digital inkjet prihter has also been provided. |
| |
| Keywords: | wide-format digital inkier printer virtual prototype co-simulation i speed error |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
