THE INFLUENCE OF COMBING ROLLER SPEED ON PURE RAMIE NOIL ROTOR YARN QUALITY AND SPINNING PERFORMANCE

This paper reports the optimum design of combing roller speed with reference to yielding 6-13 Ne(98.4—45.4 tex) pure ramie noil rotor-spun yarns. The universal rotatable composite design is adopted to get the highly precise regression equations, in which the variables are combing roller speed and yarn linear density considered to be the main technological parameters of combing roller and, the responses are the evaluation indexes concerning spinning stability, fiber length distribution of fibre ring from rotor groove and yarn properties. Based on these regression equations, the contours are plotted to analyse the influences of the parameters on the evaluation indexes; the optimization multicriteria mathematical model is simultaneously established to obtain the optimum parameters with the aid of Object Programming Approach along with Constrained Random Ray Method. Finally, an experiment is carried out to further test the acceptance of the calculated optimum values. It is shown that, for any yarn linear density within 6—13 Ne (98.4—45.4 tex), combing roller speed varying from 5000 to 9150 r/min affects content of extra-long fibre in fibre ring from rotor groove and yarn properties but does not significantly influence spinning stability; 7075 r/min, at which the SAQ-12 type of saw-toothed combing roller runs, is recommended to be the optimum combing roller speed for producing 6—13 Ne (98.4—45.4 tex) pure ramie noil yarns, where a compromise is achieved among the lowest content of extra-long fibre in fibre ring, the best spinning stability and the best yarn properties.

THE INFLUENCE OF COMBING ROLLER SPEED ON PURE RAMIE NOIL ROTOR YARN QUALITY AND SPINNING PERFORMANCE

This paper reports the optimum design of combing roller speed with reference to yielding 6-13 Ne (98.4-45.4 tex) pure ramie noil rotor-spun yarns. The universal rotatable composite design is adopted to get the highly precise regression equations, in which the variables are combing roller speed and yarn linear density considered to be the main technological parameters of combing roller and, the responses are the evaluation indexes concerning spinning stability, fiber length distribution of fibre ring from rotor groove and yarn properties. Based on these regression equations, the contours are plotted to analyse the influences of the parameters on the evaluation indexes; the optimization multicriteria mathematical model is simultaneously established to obtain the optimum parameters with the aid of Object Programming Approach along with Constrained Random Ray Method. Finally, an experiment is carried out to further test the acceptance of the calculated i?optimum values. It is shown that, for any yarn linear density within 6-13 Ne (98.4-45.4 tex), combing roller speed varying from 5000 to 9150 r/min affects content of extra-long fibre in fibre ring from rotor groove and yarn properties but does not significantly influence spinning stability; 7075 r/min, at which the SAQ-12 type of saw-toothed combing roller runs, is recommended to be the optimum combing roller speed for producing 6-13 Ne (98.4-45.4 tex) pure ramie noil yarns, where a compromise is achieved among the lowest content of extra-long fibre in fibre ring, the best spinning stability and the best yarn properties.