| 平头立铣刀无过切干涉刀位轨迹的自动生成 |
| |
| 引用本文： | 钟建琳,喻道远,段正澄. 平头立铣刀无过切干涉刀位轨迹的自动生成[J]. 华中科技大学学报(自然科学版), 1998, 0(4) |
| |
| 作者姓名： | 钟建琳 喻道远 段正澄 |
| |
| 作者单位： | 华中理工大学机械科学与工程学院 |
| |
| 基金项目： | 湖北省自然科学基金,国家“863”CIMS主题应用工厂项目 |
| |
| 摘 要： | 提出了一种空间自由曲面平头立铣刀无过切干涉的刀位轨迹自动生成的新方法，对三轴和五轴联动数控加工的情形都加以了详细论述，并在计算机上成功地实现了无过切干涉刀位轨迹的自动生成．
|
| 关 键 词： | CAM；数控编程；空间自由曲面；过切干涉 |
Automatic Generation of the Flat End Cutter Path without Overcut Interference during Machining of Sculptured Surfaces |
| |
| Zhong Jianlin Dr., College of Mech. Sci. , Eng.,HUST,Wuhan ,China. Yu Daoyuan Duan Zhengcheng. Automatic Generation of the Flat End Cutter Path without Overcut Interference during Machining of Sculptured Surfaces[J]. JOURNAL OF HUAZHONG UNIVERSITY OF SCIENCE AND TECHNOLOGY.NATURE SCIENCE, 1998, 0(4) |
| |
| Authors: | Zhong Jianlin Dr. College of Mech. Sci. & Eng. HUST Wuhan China. Yu Daoyuan Duan Zhengcheng |
| |
| Affiliation: | Zhong Jianlin Dr., College of Mech. Sci. & Eng.,HUST,Wuhan 430074,China. Yu Daoyuan Duan Zhengcheng |
| |
| Abstract: | Based on the analyses of advantages and disadvantages of the current NC machining of sculptured surfaces using the flat end cutter, a new method is proposed for the automatic generation of the flat end cutter path without overcut interference during machining. The situations in both 5 axis and 3 axis NC machining are discussed. The automatic path generation has been successfully realized on a computer. |
| |
| Keywords: | CAM NC programming sculptured surface overcut interference |
| 本文献已被 CNKI 等数据库收录！ |
