首页 | 本学科首页   官方微博 | 高级检索  
     

颗粒增强不锈钢基复合材料冲蚀磨损性能研究
引用本文:高义民,张凤华,邢建东,唐武,鲍崇高. 颗粒增强不锈钢基复合材料冲蚀磨损性能研究[J]. 西安交通大学学报, 2001, 35(7): 727-730
作者姓名:高义民  张凤华  邢建东  唐武  鲍崇高
作者单位:1. 西安交通大学机械工程学院,
2. 广州有色金属研究院
基金项目:西安交通大学科学研究基金资助项目.
摘    要:在MMG-200高温氧化-冲刷腐蚀磨损试验机上,考察了Al

关 键 词:湿法磷酸 冲蚀磨损性能 颗粒增强 不锈钢基复合材料
文章编号:0253-987X(2001)07-0727-04
修稿时间:2000-11-28

Erosive Wear Resistance of Particle Reinforced Stainless Steel Composites
Gao Yimin ,Zhang Fenghua ,Xing Jiandong ,Tang Wu ,Bao Chonggao. Erosive Wear Resistance of Particle Reinforced Stainless Steel Composites[J]. Journal of Xi'an Jiaotong University, 2001, 35(7): 727-730
Authors:Gao Yimin   Zhang Fenghua   Xing Jiandong   Tang Wu   Bao Chonggao
Affiliation:Gao Yimin 1,Zhang Fenghua 2,Xing Jiandong 1,Tang Wu 1,Bao Chonggao 1
Abstract:The erosive wear characteristics of alumina/stainless steel composite, WC/stainless steel composite and high chromium steel(as reference material) were investigated on the erosive wear tester of MMG-200 simulating the erosion in wet phosphoric acid solution. Results show that under the erosive angles of 30 and 60 degrees ,the wear resistance of the composites is superior to that of the high chromium steel, and the wear resistance of alumina/stainless steel composite is superior to that of the WC/stainless steel compostie. The main factor influencing the erosive wear resistance of the composites is the interface between ceramic particles and metal matrix. It is possible to further increase the wear resistance of the composites through improving the corrosion resistance of the interface.
Keywords:wet phosphoric acid  erosive wear  composites
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号