| 蜂窝陶瓷涂层质量分数的研究 |
| |
| 引用本文： | 熊建利,鲍成根.蜂窝陶瓷涂层质量分数的研究[J].合肥工业大学学报(自然科学版),2004,27(9):1112-1114. |
| |
| 作者姓名： | 熊建利 鲍成根 |
| |
| 作者单位： | 安徽职业技术学院,材料系,安徽,合肥,230051;合肥市技术监督咨询中心,安徽,合肥,230001 |
| |
| 摘 要： | 文章以蜂窝陶瓷涂层为研究对象,对制备涂层用的Al2O3胶液在蜂窝陶瓷涂层的质量分数进行研究。结果表明,影响胶液最大的因素是质量分数,质量分数越高,胶液的触变性越明显,凡是影响胶液触变性的因素,都能影响蜂窝陶瓷涂层的质量分数。高的质量分数的获得,实际操作与胶液发生触变的时间相协调至关重要。
|
| 关 键 词： | 涂层 胶液 触变性 质量分数 |
| 文章编号： | 1003-5060(2004)09-1112-03 |
| 修稿时间： | 2004年1月2日 |
Study on loading of the honeycomb ceramic monolithic washcoat |
| |
| XIONG Jian-li,BAO Cheng-gen.Study on loading of the honeycomb ceramic monolithic washcoat[J].Journal of Hefei University of Technology(Natural Science),2004,27(9):1112-1114. |
| |
| Authors: | XIONG Jian-li BAO Cheng-gen |
| |
| Institution: | XIONG Jian-li~1,BAO Cheng-gen~2 |
| |
| Abstract: | In this paper, the loading of the monolithic washcoat of the sol Al_2O_3 have been studied.The results revealed that the most important factor in the sol thixotropy is the solid content of the dispersion. The sol thixotropy is favorable to the increase of the loading of the monolithic washcoat. Practical operation should coordinate with the time of sol thixotropy to obtain the higher loading of monolithic washcoat. Higher loading can be obtained on monolithic support with high water absorption. The operation under high vacuum is favorable to the increase of the loading. |
| |
| Keywords: | washcoat sol thixotropy loading |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
