| 铝合金三维弯曲管件差速挤压过程有限元模拟 |
| |
| 引用本文： | 杜德恒,宋继顺,马叙,尹康,崔宏祥.铝合金三维弯曲管件差速挤压过程有限元模拟[J].天津理工大学学报,2010,26(1):12-16. |
| |
| 作者姓名： | 杜德恒 宋继顺 马叙 尹康 崔宏祥 |
| |
| 作者单位： | 天津理工大学,材料科学与工程学院,天津,300384 |
| |
| 摘 要： | 本文采用材料流动控制方法,实现了弯曲管件一次性挤压成形;采用有限元法,在DEFORM-3D有限元商业软件上实现了弯曲管件双凸模差速挤出过程的三维数值模拟,分析了双凸模挤压过程速度场分布、材料流动规律、挤压力、应力场和应变场的分布以及在4个凸模作用下实现了管材的空间弯曲;介绍了一次性挤压直接成形弯曲管件的机理,对实际模具设计将具有重要的指导意义.
|
| 关 键 词： | 有限元模拟 挤出弯曲 一次性成形 流动控制 差速挤压 |
Finite element analysis of bending aluminum-alloy tube in differential velocity |
| |
| DU De-heng,SONG Ji-shun,MA Xu,YIN Kang,CUI Hong-xiang.Finite element analysis of bending aluminum-alloy tube in differential velocity[J].Journal of Tianjin University of Technology,2010,26(1):12-16. |
| |
| Authors: | DU De-heng SONG Ji-shun MA Xu YIN Kang CUI Hong-xiang |
| |
| Institution: | DU De-heng,SONG Ji-shun,MA Xu,YIN Kang,CUI Hong-xiang(School of Materials Science , Engineering,Tianjin University of Technology,Tianjin 300384,China) |
| |
| Abstract: | Material flow control method is used in this paper,through this method achieved bending aluminum-alloy tube extrusion forming process.Used Finite element method,achieved three-dimensional numerical simulation of multi-ram extrusion(MRE) of bending aluminum-alloy tube in differential velocity by DEFORM-3D finite element commercial software,analyzed velocity field distribution,material flow,squeezing pressure,stress and strain field distribution of the process as well as through four punch to achieve pipe ben... |
| |
| Keywords: | finite element analysis extrusion bending one step forming flow control extrusion with differential velocity |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
