| 改性尼龙6复合材料的力学性能研究 |
| |
| 引用本文： | 彭超,郑玉婴. 改性尼龙6复合材料的力学性能研究[J]. 福州大学学报(自然科学版), 2006, 34(4): 543-546 |
| |
| 作者姓名： | 彭超 郑玉婴 |
| |
| 作者单位： | 1. 福州市塑料科学技术研究所,福建,福州,350002
2. 福州大学化学化工学院,福建,福州,350002 |
| |
| 基金项目： | 福建省自然科学基金;福建省科技计划 |
| |
| 摘 要： | 采用经化学改性的芳纶纤维增强尼龙6,并通过红外光谱和环境扫描电镜分析其界面层.结果表明,芳纶纤维经异氰酸酯化及封端稳定处理后,其表面所接枝的不稳定基团-NCO转化成稳定的-NHCO-,封端结果较为明显;改性后纤维表面附有接枝物,从而使表面粗糙程度大大增加.力学性能测试结果显示改性尼龙6复合材料的拉伸和弯曲强度得到了改善,但冲击性能略为下降.
|
| 关 键 词： | 尼龙6 复合材料 力学性能 |
| 文章编号： | 1000-2243(2006)04-0543-04 |
| 修稿时间： | 2005-05-08 |
Research on the mechanical properties of modified nylon 6 composites |
| |
| PENG Chao,ZHENG Yu-ying. Research on the mechanical properties of modified nylon 6 composites[J]. Journal of Fuzhou University(Natural Science Edition), 2006, 34(4): 543-546 |
| |
| Authors: | PENG Chao ZHENG Yu-ying |
| |
| Affiliation: | 1.Plastic Technology Institute,Fuzhou,Fujian 350002,China;2.College of Chemistry and Chemical Engineering,Fuzhou University, Fuzhou,Fujian 350002,China) |
| |
| Abstract: | Nylon 6 was reinforced by the aramid fiber which modified by chemical treatment,and the interface was analysed by FTIR and ESEM,the result showed: the unstable group of-NCO has been stabilized into-NHCO group after steady disposal,and the effect was obvious;the surface of modified fiber became coarse because of the adhesion of the grafted polymer.The test of mechanical properties revealed the tensile strength and flexural strength of modified nylon 6 composites were improved while the impact strength declined. |
| |
| Keywords: | nylon 6 composites mechanical properties |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《福州大学学报(自然科学版)》浏览原始摘要信息 |
|
点击此处可从《福州大学学报(自然科学版)》下载免费的PDF全文 |
|
