首页 | 本学科首页   官方微博 | 高级检索  
     检索      

316L不锈钢/Y-PSZ复合材料的制备与性能
引用本文:谢建新,郭振文,张文泉,刘雪峰.316L不锈钢/Y-PSZ复合材料的制备与性能[J].北京科技大学学报,2007,29(5):494-498.
作者姓名:谢建新  郭振文  张文泉  刘雪峰
作者单位:1. 北京科技大学材料科学与工程学院,北京,100083
2. 北京工业大学材料科学与工程学院,北京,100022
摘    要:采用粉末冶金方法制备了316L不锈钢/Y-PSZ复合材料,研究了316L不锈钢含量与粉末粒度对复合材料的显微组织、烧结收缩率、密度及硬度的影响.结果表明:随着316L含量的增加,复合材料的密度增高,相对密度和烧结收缩率逐渐降低,试样的HRC硬度值下降;在316L含量一定的情况下,随着316L颗粒尺寸的增大,复合材料的密度略有降低,相对密度和线收缩率逐渐减小,试样的HRC硬度值下降.在本文的研究条件下,所制备复合材料的相对密度值在92.5%~95.5%之间.

关 键 词:316L/Y-PSZ复合材料  粉末冶金  显微组织  烧结性能  不锈钢  复合材料  性能  stainless  steel  properties  Fabrication  密度值  条件  线收缩率  颗粒尺寸  情况  硬度值  试样  相对密度  结果  影响  烧结收缩率  显微组织  粉末粒度  含量
修稿时间:2006-02-222006-04-22

Fabrication and properties of 316L stainless steel/Y-PSZ composites
XIE Jianxin,GUO Zhenwen,ZHANG Wenquan,LIU Xuefeng.Fabrication and properties of 316L stainless steel/Y-PSZ composites[J].Journal of University of Science and Technology Beijing,2007,29(5):494-498.
Authors:XIE Jianxin  GUO Zhenwen  ZHANG Wenquan  LIU Xuefeng
Institution:1.Materials Science and Engineering School, University of Science and Technology Beijing, Beijing 100083, China; 2. Materials Science and Engineering College, Beijing University of Technology, Beijing 100022, China
Abstract:A kind of composite material of 316L stainless steel and Y2O3 partly stabilized zirconia (Y-PSZ) was prepared by powder metallurgic process. The effects of the content and size of 316L grains on the microstructure, relative density and hardness of the composite were investigated. The results showed that the relative density, shrinkage ratio and HRC value of the sintered samples decreased with the increase of 316L content. When the content of 316L kept constant, the relative density, shrinkage ratio and HRC value of the sintered samples decreased with the increase of 316L particle size. The relative density value was in the range from 92.5% to 95.5% in the present research conditions.
Keywords:316L/Y-PSZ composites  powder metallurgy  microstructure  sintering character
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号