首页 | 本学科首页   官方微博 | 高级检索  
     检索      

蓬莱坝组白云岩孔隙成因的地球化学探讨
引用本文:孟庆强,朱东亚,解启来,金之钧.蓬莱坝组白云岩孔隙成因的地球化学探讨[J].西安石油大学学报(自然科学版),2011,26(5):1-5,113.
作者姓名:孟庆强  朱东亚  解启来  金之钧
作者单位:1. 中国石化石油勘探开发研究院,北京 100083;中国地质大学(北京)能源学院,北京 100083
2. 中国石化石油勘探开发研究院,北京,100083
3. 华南农业大学 资源环境学院,广东 广州,510640
基金项目:国家自然科学基金项目(编号:40872088); 中国博士后科学基金(编号:20100470500)资助
摘    要:蓬莱坝剖面位于塔里木盆地北缘巴楚地区,发育有中上寒武统-下奥陶统的白云岩.其中上寒武统白云岩局部可见由易于溶蚀白云岩和难于溶蚀白云岩组成的薄互层,层厚为几十厘米至一米不等.易于溶蚀的白云岩层向内凹入,并在表面见有较多的溶蚀孔洞;难于溶蚀的白云岩层向外凸出,表面光滑.地球化学分析表明,溶蚀程度不同的白云岩具有相似的碳氧同位素组成,与同时期正常沉积碳酸盐岩的同位素组成相当.但二者在锶同位素组成与矿物含量上有着显著差异:易于溶蚀和难于溶蚀白云岩样品的Sr同位素之比,即w(87 Sr)/w(86 Sr)比值范围分别为0.708 814~0.709 351和0.709 091~0.710 202之间,平均值分别为0.709 141和0.709 500;前者不但在总体上低于后者,而且每一个易于溶蚀的白云岩样品的值要低于相邻的较早时期形成的难于溶蚀的白云岩的值;在矿物组成方面,易于溶蚀白云岩中的石英体积分数显著低于难于溶蚀白云岩中的,二者平均值分别为0.90%和4.37%.综合分析认为,易于溶蚀和难于溶蚀的白云岩分别形成于海平面相对较高和相对较低的环境中.在海平面相对较高的环境中形成的白云岩具有较粗的晶体结构组成,并具有较多的原生孔隙,是次生溶蚀易于发生的关键因素.

关 键 词:塔里木盆地  寒武系  白云岩  次生溶蚀  同位素

Study on the pore genesis of the dolomite of Penglaiba Formation from geochemistry
MENG Qing-qiang,ZHU Dong-ya,XIE Qi-lai,JIN Zhi-jun,.College of Resource , Environment,South China Agricultural University,Guangzhou ,Guangdong,China.Study on the pore genesis of the dolomite of Penglaiba Formation from geochemistry[J].Journal of Xian Shiyou University,2011,26(5):1-5,113.
Authors:MENG Qing-qiang    ZHU Dong-ya  XIE Qi-lai  JIN Zhi-jun  College of Resource  Environment  South China Agricultural University  Guangzhou  Guangdong  China
Institution:MENG Qing-qiang1,2,ZHU Dong-ya1,XIE Qi-lai3,JIN Zhi-jun1(1.Research Institute of Petroleum Exploration and Development,Sinopec,Beijing 100083,China,2.Faculty of Energy Resources,China University of Geosciences(Beijing),3.College of Resource and Environment,South China Agricultural University,Guangzhou 510640,Guangdong,China)
Abstract:There are well developed middle-upper Cambrian to lower Ordovician dolomites in Bachu area in the northern bound of Tarim Basin.Some thin interbeds of dolomite with different dissolution degree can be found locally in the middle-upper Cambrian,whose thickness is from dozens of cm to 1m.The easily-dissolved dolomite layers are concave inward,and there are a lot of dissolution pores in the surface of the layers.The difficultly-dissolved dolomite layers are convex outward,and the dissolution pores in the surfa...
Keywords:Tarim Basin  Cambrian  dolomite  secondary dissolution  isotope  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号