首页 | 本学科首页   官方微博 | 高级检索  
     

带长出水管模型泵装置特性试验方法
引用本文:陈松山,葛强,陆伟刚,王林锁,陈玉明. 带长出水管模型泵装置特性试验方法[J]. 扬州大学学报(自然科学版), 2003, 6(4): 78-82
作者姓名:陈松山  葛强  陆伟刚  王林锁  陈玉明
作者单位:1. 扬州大学水利与建筑工程学院水利水电工程系,江苏,扬州,225009;江苏大学动力工程学院,江苏,镇江,212013
2. 扬州大学信息工程学院电气工程系,江苏,扬州,225009
3. 扬州大学水利与建筑工程学院水利水电工程系,江苏,扬州,225009
基金项目:水利部科技创新基金(SCXC2002-06)
摘    要:结合湖北夹河沟泵站带长出水管的泵装置特性试验研究,提出了将模型设计成模拟进水流道及部分出水管的泵装置和模拟全部出水管不带泵的水工模型装置,并通过两装置性能的合成分析,得出泵装置特性的试验方法,同时还利用水工模型装置对虹吸出水管中的虹吸形成过程进行了观察研究.研究成果不仅为夹河沟泵站技术改造提供了必要的依据,且对同类带长出水管的泵装置模型试验有参考价值.

关 键 词:泵装置特性 出水管道 模型试验
文章编号:1007-824X(2003)04-0078-05

THE EXPERIMENTAL METHOD ABOUT PUMP SETTING CHARACTERISTICS WITH LONG DISCHARGE PIPE
CHEN Song-shan GE Qiang LU Wei-gang WANG Lin-suo CHEN Yu-ming. THE EXPERIMENTAL METHOD ABOUT PUMP SETTING CHARACTERISTICS WITH LONG DISCHARGE PIPE[J]. Journal of Yangzhou University(Natural Science Edition), 2003, 6(4): 78-82
Authors:CHEN Song-shan GE Qiang LU Wei-gang WANG Lin-suo CHEN Yu-ming
Abstract:Combined with the pump setting characteristics model test of Jiahegou pumping station with long discharge pipe, the method of accomplishing the whole pump setting characteristics model test is put forward by the way of designing two different experimental setting. The one called partial pump setting model simulates inlet passage and the portion of discharge pipe with pump, the other called hydraulic model simulates the full discharge pipe without pump. The results can be obtained by integrating and analyzing the two model test data and also the process of forming siphon is observed. The research not only has provided the necessary basis for the reconstruction of Jiahegou pumping station, but also has the function of guidance and reference for similar pump setting model tests.
Keywords:pump setting characteristics  discharge pipes model test
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号