利用氧化基粉煤灰粉和医疗废弃物颗粒开发无电镀镍基复合涂层 (Ni–P/粉煤灰和Ni-P/Ni–P/SiO2–Al2O3) |
| |
作者单位: | 1)School of Natural and Built Environment, Queen’s University Belfast, Belfast BT7 1NN, UK |
| |
摘 要: | Recycling and reusing materials from waste have become a nexus in the development of sustainable materials, leading to more balanced technologies. In this study, we developed a composite coating by co-depositing recycled ceramic particles, pulverised fly ash (PFA) and medical ceramics (MC), into a nickel–phosphorus matrix using a typical electroless plating process. Scanning electron microscopy (SEM) images indicated well-dispersed particles in the Ni–P matrix. However, compared with the MC particles, the PFA particles were distributed scantily with a lower content in the matrix, which could be due to the less impingement effect during the co-deposition. A modified microstructure with refined grains was obtained for the PFA-incorporated composite coating, as seen in the SEM micrograph. The X-ray diffraction result of the MC-incorporated composite coating showed the formation of NixSiy phases in addition to the typical Ni3P phases for the heat-treated electroless Ni–P coatings. Upon heat treatment, the PFA-reinforced composite coating, due to a modified microstructure, exhibited a higher microhardness up to HK0.05 818, which is comparable to that of the traditional SiC particle-embedded composite coating (HK0.05 825). The findings can potentially open up a new strategy to further advance the green approach for industrial surface engineering.
|
关 键 词: | ; ; ; ; |
|
| 点击此处可从《矿物冶金与材料学报》浏览原始摘要信息 |
|
点击此处可从《矿物冶金与材料学报》下载免费的PDF全文 |
|