| 聚天门冬氨酸高吸水性树脂吸水率测定方法的研究 |
| |
| 引用本文： | 赵颖,方莉,谭天伟. 聚天门冬氨酸高吸水性树脂吸水率测定方法的研究[J]. 北京化工大学学报(自然科学版), 2005, 32(1): 21-24 |
| |
| 作者姓名： | 赵颖 方莉 谭天伟 |
| |
| 作者单位： | 北京化工大学生命科学与技术学院,北京,100029;北京化工大学生命科学与技术学院,北京,100029;北京化工大学生命科学与技术学院,北京,100029 |
| |
| 基金项目： | 国家科技攻关项目 , 国家自然科学基金 |
| |
| 摘 要： | 试验采用常用的吸水量测定方法考察聚天门冬氨酸吸水树脂的吸水性能，得出茶袋法更适合对其性能研究，采用此法测定吸水率的最适条件为：干树脂质量为02?g；在标有刻度的水槽中同时测定若干个样品；凝胶态树脂在吸水1，6，24h后测定吸水率；白色块状（含粉末状）树脂在吸水10，30min，10，22h后测定吸水率。文中还探讨了树脂的外部形态及部结构对其吸水性能的影响，发现白色块状和粉末状树脂的吸水率和吸水速度高于凝胶态树脂，树脂外观结构越疏松吸水速度越快。
|
| 关 键 词： | 聚天门冬氨酸 高吸水性树脂 吸水性能 分析方法 |
| 收稿时间： | 2004-03-09 |
| 修稿时间： | 2004-03-09 |
Measurement of water absorption capacity of polyaspartic acid resin and its properties |
| |
| ZHAO Ying FANG Li TAN Tian wei. Measurement of water absorption capacity of polyaspartic acid resin and its properties[J]. Journal of Beijing University of Chemical Technology, 2005, 32(1): 21-24 |
| |
| Authors: | ZHAO Ying FANG Li TAN Tian wei |
| |
| Affiliation: | College of Life Science and Technology，Beijing University of Chemical Technology，Beijing 100029，China |
| |
| Abstract: | Different methods for determining the water absorption capacity and rate of polyaspartic acid resins were studied, and the results show that the tea bag method is optimum. The optimum conditions are: the water absorbent time of the glue shape resin 1,6,24h；the water absorbent time of the cubeshape(powder) resin 10,30min,10,22h；the dry mass 0.2g；the initial water volume should be excessive. The water absorption capacity tests were conducted on the polyaspartic acid resins by this method. It is found that the water absorption capacity and rate of the cube-shape(powder) polyaspartic acid resin are higher than that of the glue-shape resin. The looser the resin structure is, the higher the water absorption rate is. |
| |
| Keywords: | polyaspartic acid high water absorption capacity resin water absorption property analysis |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《北京化工大学学报(自然科学版)》浏览原始摘要信息 |
|
点击此处可从《北京化工大学学报(自然科学版)》下载全文 |
