| 综放工作面采支速度比的可靠性分析 |
| |
| 引用本文： | 罗善明,缪协兴. 综放工作面采支速度比的可靠性分析[J]. 湖南科技大学学报(自然科学版), 2001, 16(1): 40-42 |
| |
| 作者姓名： | 罗善明 缪协兴 |
| |
| 作者单位： | 1. 湘潭工学院 机械系,
2. 中国矿业大学 理学院, |
| |
| 基金项目： | 国家自然科学基金重点资助项目(59734090) |
| |
| 摘 要： | 从可靠性的角度，应用强度分布和应力分布的干涉理论，对综放工作面移架—割煤系统的可靠性进行了较为详细的分析，并建立了相应的联结方程，得到了采支速度比的计算公式.计算结果表明，采支速度比随系统可靠度的变化可分为3个明显不同的范围，不同类型的工作面应按照不同的可靠度要求选取相应的数值.对于高产高效综放面，采支速度比应在1.30～1.50范围内选取；对超长综放面，采支速度比应在1.50～1.80范围内选取.图2，表2，参6.
|
| 关 键 词： | 综放工作面；采支速度比；可靠性；干涉理论 |
| 文章编号： | 1000-9930(2001)01-0040-03 |
| 修稿时间： | 2000-02-08 |
The reliability analysisof the velocity ratio of coal cutting to support moving in fully mechanized top-coalcaving face |
| |
| LUO Shan-ming,MIAO Xie-xing. The reliability analysisof the velocity ratio of coal cutting to support moving in fully mechanized top-coalcaving face[J]. Journal of Hunan University of Science & Technology(Natural Science Editon), 2001, 16(1): 40-42 |
| |
| Authors: | LUO Shan-ming MIAO Xie-xing |
| |
| Affiliation: | LUO Shan-ming 1,MIAO Xie-xing 2 |
| |
| Abstract: | From the angle of reliability, the system of coal cutting and support moving of high productivity and efficiency work face is analyzed in detail by using the interference theory of strength and stress distribution. The coupling equation and calculation formulas of the velocity ratio of coal cutting to support moving are established. The characteristic curve of the velocity ratio consists of three different areas, so the ratio of different work face should be selected according to different demand of reliability. The velocity ratio of coal cutting to support moving can be selected from 1.3 to 1.5 in high productivity and efficiency work face, or from 1.5 to 1.8 in super-length fully mechanized top-coal caving face.2figs.,2tabs.,6refs. |
| |
| Keywords: | fully mechanized top-coal caving face velocity ratio of coal cutting to support moving reliability interference theory |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
