| 超高分子量聚乙烯磨损性能的研究 |
| |
| 引用本文： | 常铁军,李大全,姜树立.超高分子量聚乙烯磨损性能的研究[J].应用科技,2002,29(9):4-6,11. |
| |
| 作者姓名： | 常铁军 李大全 姜树立 |
| |
| 作者单位： | 1. 哈尔滨工程大学机电工程学院,黑龙江哈尔滨,150001
2. 佳木斯船舶检验处,黑龙江佳木斯,154000 |
| |
| 摘 要： | 采用超高分子量聚乙烯、铸钢ZG20MnSi、Fe-05电弧熔焊、Ni60热喷焊4种材料，在HT200灰铸铁为摩擦副无润滑条件下，进行磨损试验。试验结果表明：超高分子量聚乙烯材料的磨损性能比铸钢ZG20MnSi高4.96倍；比Fe-05电弧熔焊材料磨损性能低9.8倍；比Ni60热喷焊材料磨损性能低4.5倍。从而为超高分子量聚乙烯替代金属材料在工程中的应用提供了依据。
|
| 关 键 词： | 磨损性能 超高分子量聚乙烯 磨擦磨损 ZG20MnSi Fe－05 Ni60 铸钢 耐磨材料 摩擦系数 |
| 文章编号： | 1009-671X(2002)09-0004-03 |
The Research on Wear-resistance of Uitrahigh Molecular Weight Polyethylene |
| |
| CHANG Tie_jun ,LI Da_quan ,JIANG Shu_li.The Research on Wear-resistance of Uitrahigh Molecular Weight Polyethylene[J].Applied Science and Technology,2002,29(9):4-6,11. |
| |
| Authors: | CHANG Tie_jun LI Da_quan JIANG Shu_li |
| |
| Institution: | CHANG Tie_jun 1,LI Da_quan 2,JIANG Shu_li 1 |
| |
| Abstract: | The non_lubricating wear_resistance of ultrahigh molecular weight polyethylene,cast steel ZG20MnSi,arc melting Fe_05 and spout welding Ni60 were tested with cast iron HT 200 wearing twins. The resulsts show that the wear_resistance of UHMW_PE is 3.96 times higher than that of ZG20MnSi, but is 8.8 times less than that of arc welding Fe_05 and 3.5 times less than that of spout welding Ni60. It is useful to UHMW_PE in replacing metal materials in engineering. |
| |
| Keywords: | ultrahigh molecular weight polyethylene wear_and_tear ZG20MnSi Fe_05 Ni60 |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
