首页 | 本学科首页   官方微博 | 高级检索  
     

致密砂岩气藏水平井段内多缝体积压裂技术的应用及其效果分析
引用本文:吴则鑫. 致密砂岩气藏水平井段内多缝体积压裂技术的应用及其效果分析[J]. 科学技术与工程, 2013, 13(7): 1957-1960
作者姓名:吴则鑫
作者单位:中国石油集团长城钻探工程有限公司地质研究院
摘    要:苏里格气田发育河流相致密砂岩、低孔特低渗的物性特点迫切需要新型储层改造技术的应用,以增加压裂裂缝网络的密度及表面积,达到初期高产和长期稳产的目的。探讨了段内多缝体积压裂技术的关键因素,即每条裂缝的规模控制和裂缝间距的控制以及每次投送暂堵剂的数量。然后通过微破裂向量扫描四维裂缝影像的监测手段对压裂裂缝规模进行了监测。同时对比段内多缝压裂井和常规压裂井投产30 d内单位套压降下的产气量,体现出段内多缝体积压裂技术的明显优势。

关 键 词:致密砂岩  压裂水平井  多缝体积压裂  裂缝监测  增产
收稿时间:2012-10-17
修稿时间:2012-11-02

Application and Effect Analysis of Segment Multi-fracture Volume Fracturing Technique in Horizontal Wells of Tight Sandstone Gas Reservoir
wu zexin. Application and Effect Analysis of Segment Multi-fracture Volume Fracturing Technique in Horizontal Wells of Tight Sandstone Gas Reservoir[J]. Science Technology and Engineering, 2013, 13(7): 1957-1960
Authors:wu zexin
Affiliation:WU Ze-xin(CNPC Greatwall Drilling Company Geology Research Institute,Panjin 124010,P.R.China)
Abstract:Sulige gas field develops fluvial-facies sandstone, characteristics of low porosity and low permeability decides the urgent need for advanced reservoir reconstruction technology, increase the density and surface area of the hydraulic fracture network, and then obtain a higher initial production rate and maintain a steady production for a longer period. This paper discusses key factors of multi-fracture volume fracturing technology, namely, every control of fracture size and fracture spacing and each delivery amount of temporary plugging agent. Then through the micro-fracture four-dimensional vector scanning, fracture scale was monitored, while comparing gas production of every unit set of pressure drop between segment multi-fracture volume fracturing and conventional fracturing well within 30 days, technology advantages of segment multi-fracture volume fracturing show up.
Keywords:tight sandstone   fractured horizontal well   fracture monitoring   stimulation
本文献已被 CNKI 等数据库收录!
点击此处可从《科学技术与工程》浏览原始摘要信息
点击此处可从《科学技术与工程》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号