| 采油螺杆泵磨损机理试验性研究 |
| |
| 引用本文： | 史建强.采油螺杆泵磨损机理试验性研究[J].科学技术与工程,2012,12(5):1151-1154. |
| |
| 作者姓名： | 史建强 |
| |
| 作者单位： | 1. 大庆油田有限责任公司第六采油厂作业大队,大庆,163114
2. 大庆油田有限责任公司采油工程研究院,大庆,163453 |
| |
| 摘 要： | 现今油田螺杆泵抽油井普遍采用的是单螺杆泵进行采油作业，针对螺杆泵转子与定子橡胶间的磨损问题，本文模拟GLB120-27型采油单螺杆泵螺杆-衬套副进行磨损试验研究，利用变频器改造MPX—2000型磨损试验机的参数及设计进行磨损试验的夹具，查阅相关文献并结合现场实际工况确定试验方案及试验参数,通过试验结果分析摩擦系数和磨损量与速度、载荷、环境介质之间的规律，为分析螺杆泵橡胶衬套磨损机理提供依据。
|
| 关 键 词： | 单螺杆泵 磨损 定子橡胶 试验参数 |
| 收稿时间： | 2011/11/21 0:00:00 |
| 修稿时间： | 2011/11/21 0:00:00 |
Test Research on Oil Screw Pumps Wear Mechanism |
| |
| shijianqiang.Test Research on Oil Screw Pumps Wear Mechanism[J].Science Technology and Engineering,2012,12(5):1151-1154. |
| |
| Authors: | shijianqiang |
| |
| Institution: | 2(Daqing Oilfield Co.,Ltd.Sixth Oil Production Plant Operating Unit1,Daqing 163114,P.R.China;Production Research & Engineering Institute of Daqing Oilfield Company Limited2,Daqing 163453,P.R.China) |
| |
| Abstract: | At present, single screw oil pumps are widely used in oil field screw pumping wells, for pump rubber between the rotor and stator wear, the paper simulated GLB120-27 single screw pump, and researched on screw type oil-bush vice, redesigned parameters of MPX-2000 wear test machine by inverter, designed the fixture of wear test machine, determined the test program and test parameters combining relevant literature with actual field conditions. Analyzed the law between friction coefficient, wear volume and speed, load, environmental media, provided the basis for Screw the rubber bushing wear mechanism. |
| |
| Keywords: | single screw wear the stator rubber test parameters |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《科学技术与工程》浏览原始摘要信息 |
| 点击此处可从《科学技术与工程》下载免费的PDF全文 |
|
