首页 | 本学科首页   官方微博 | 高级检索  
     检索      

铜飞片在爆炸加载下的层裂分析
引用本文:陶钢,付源辉,崔艳丽.铜飞片在爆炸加载下的层裂分析[J].南京理工大学学报(自然科学版),2006,30(6):684-687.
作者姓名:陶钢  付源辉  崔艳丽
作者单位:南京理工大学,动力工程学院,江苏,南京,210094
摘    要:对紫铜飞片在爆炸作用下的层裂问题进行了试验和理论研究。通过对软回收后的铜板飞片断面进行金相分析,得到层裂面存在沿晶断裂,在层裂面附近有许多微裂纹产生,整个样品内存在大量的交叉滑移带和破碎孪生带的结论。借助LS-DYNA2D程序模拟了铜板在爆炸加载下的层裂过程,计算结果与试验结果基本一致。

关 键 词:  层裂  爆炸  金相分析  数值模拟
文章编号:1005-9830(2006)06-0684-04
收稿时间:2005-08-28
修稿时间:2006-09-19

Dynamic Spalling of Copper Plates under Explosive Loading
TAO Gang,FU Yuan-hui,CUI Yan-li.Dynamic Spalling of Copper Plates under Explosive Loading[J].Journal of Nanjing University of Science and Technology(Nature Science),2006,30(6):684-687.
Authors:TAO Gang  FU Yuan-hui  CUI Yan-li
Institution:School of Power Engineering, NUST, Nanjing 210094, China
Abstract:This paper reports the researches of dynamic spalling problems of copper plates under the explosive loading by the theory and experimental methods.Optical microscopy observations by using soft recovery sampling illustrate the cleavage and intergranular fracture for the spallation.There are a lot of voids(microcracks),slip bands,and microtwins near the spalling layers of sampling.The spalling results simulated by LS-DYNA2D hydrocode are consistent with the experimental results.
Keywords:copper  spallation  explosion  optical microscopy  numerical simulations
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号