| ARB工艺下Al/Zn多层复合材料界面变化的研究 |
| |
| 引用本文： | 张永,赵冠楠,严鹏飞,严彪. ARB工艺下Al/Zn多层复合材料界面变化的研究[J]. 上海理工大学学报, 2016, 37(4): 138-142 |
| |
| 作者姓名： | 张永 赵冠楠 严鹏飞 严彪 |
| |
| 作者单位： | 同济大学 材料科学与工程学院, 上海 200093;上海市金属功能材料应用开发重点实验室, 上海 201804,同济大学 材料科学与工程学院, 上海 200093;上海市金属功能材料应用开发重点实验室, 上海 201804,同济大学 材料科学与工程学院, 上海 200093;上海市金属功能材料应用开发重点实验室, 上海 201804,同济大学 材料科学与工程学院, 上海 200093;上海市金属功能材料应用开发重点实验室, 上海 201804 |
| |
| 摘 要： | 累积复合轧制（Accumulative Roll-Bonding，ARB）工艺作为一种大塑性变形工艺，近期在制备金属基多层复合材料方面受到关注.通过ARB工艺制备Al/Zn多层复合材料，重点观察Al/Zn多层复合材料界面间的变化规律.在扫描电子显微镜（SEM）下，可以明显地观察到在Al/Zn界面处扩散层的存在，说明在ARB工艺状态下，不同层之间存在扩散作用，但是X射线衍射（XRD）结果无法分辨材料内部结构.通过透射电子显微镜（TEM）观察第3周期ARB态Al/Zn多层复合材料截面，可以看到，在Al/Zn多层复合材料层间，存在4种形貌的组织，参考Al-Zn合金的时效析出过程可知，在ARB工艺过程中，Al过固溶体存在连续脱溶和非连续脱溶两种路径，其脱溶路径的不同主要与扩散到Al基体中的Zn浓度有关.
|
| 关 键 词： | 累积复合轧制(ARB) 铝基复合材料 界面变化 |
| 收稿时间： | 2016-03-10 |
Research in Interface Structure Changing of Al/Zn Multilayer Composite Material Fabricated by ARB |
| |
| ZHANG Yong,ZHAO Guannan,YAN Pengfei and YAN Biao. Research in Interface Structure Changing of Al/Zn Multilayer Composite Material Fabricated by ARB[J]. Journal of University of Shanghai For Science and Technology, 2016, 37(4): 138-142 |
| |
| Authors: | ZHANG Yong ZHAO Guannan YAN Pengfei YAN Biao |
| |
| Affiliation: | School of Material Science and Engineering, TongJi University, Shanghai 20092, China;Shanghai Key Lab of D&A for Metal-Functional Materials, Shanghai 201804, China,School of Material Science and Engineering, TongJi University, Shanghai 20092, China;Shanghai Key Lab of D&A for Metal-Functional Materials, Shanghai 201804, China,School of Material Science and Engineering, TongJi University, Shanghai 20092, China;Shanghai Key Lab of D&A for Metal-Functional Materials, Shanghai 201804, China and School of Material Science and Engineering, TongJi University, Shanghai 20092, China;Shanghai Key Lab of D&A for Metal-Functional Materials, Shanghai 201804, China |
| |
| Abstract: | Accumulative Roll-Bonding(ARB) process is one kind of large plastic deformation process,which has made much attention in layer composite materials.In this paper,we fabricated Al/Zn multilayer composite materials by ARB, and observed the Al/Zn interface changing regulation.Under the SEM,we can clearly observe the diffusion layer existed between the Al/Zn interface.But the XRD results didn''t differentiate the internal structure.Through TEM observation of the third cycle ARB Al/Zn multilayer composite materials section,we can see,in the Al/Zn multilayer composite material layers,there are four kinds of structure.Reference Al-Zn alloy ageing precipitation process,we know that in the process of the ARB,Al supersaturated solid solution existe continuous exsolution and non-continuous exsolution,the main difference relate to Zn atomic concentration in Al matrix. |
| |
| Keywords: | ARB aluminum matrix composites interface structure change |
|
| 点击此处可从《上海理工大学学报》浏览原始摘要信息 |
|
点击此处可从《上海理工大学学报》下载全文 |
|
