| Cu-Zn-Al合金纳米管与固体类流态 |
| |
| 引用本文： | 高后秀,陈泉水,张贵杰,宋伟夫,沈骏,杨渝钦.Cu-Zn-Al合金纳米管与固体类流态[J].天津大学学报(自然科学与工程技术版),2004,37(7):565-569. |
| |
| 作者姓名： | 高后秀 陈泉水 张贵杰 宋伟夫 沈骏 杨渝钦 |
| |
| 作者单位： | [1]天津大学材料科学与工程学院,天津300072 [2]东华理工学院材料科学与工程系,江西抚州344000 |
| |
| 基金项目： | 国家科技部攀登计划资助项目(1999 444)，天津市自然科学基金资助项目(0033610611)，南开大学天津大学刘徽应用数学中心资助项目. |
| |
| 摘 要： | 常温常压下研究Cu-Zn-Al合金表面的“类流态”现象时，发现经混合酸和浸蚀处理后的Cu-Zn-Al合金基体上生成了结构和形貌新颖的合金纳米管，其表面光滑，没有吸附物，长径比在40以上．通过透射电镜、X射线等观察分析证实“类流态”胞区的存在是合金纳米管生成的必要条件．合金中存在的大量微孪晶、堆垛层错、小角晶界等缺陷以及“类流态”胞区内原子结构的重排是合金纳米管形核的关键，“类流态”胞区固定了合金原子的悬浮键，为纳米管的生长提供了结构因素和能量．
|
| 关 键 词： | 纳米管 类流态 Cu-Zn-Al合金 透射电镜 |
| 文章编号： | 0493-2137(2004)07-0565-05 |
| 修稿时间： | 2003年3月6日 |
Cu-Zn-Al Alloy Nanotube and Quasi-Fluid State in Solid |
| |
| GAO Hou-xiu,CHEN Quan-shui.Cu-Zn-Al Alloy Nanotube and Quasi-Fluid State in Solid[J].Journal of Tianjin University(Science and Technology),2004,37(7):565-569. |
| |
| Authors: | GAO Hou-xiu CHEN Quan-shui |
| |
| Institution: | GAO Hou-xiu~1,CHEN Quan-shui~ |
| |
| Abstract: | In normal temperature and pressure, a kind of nanotube with new structure and pattern whose substrate was Cu-Zn-Al alloy was found after being treated by mixed acid and etched. The surface of nanotube was smooth and there was no absorbate on it. The slenderness ratio of nanotube was over 40. It was confirmed that the existence of 'quasi-fluid' cell was the necessary condition through Transmission electron microscope(TEM) and X-ray diffraction analysis. It was essential for nucleation of alloy nanotube that there be many faults such as micro-twin, stacking fault, small-angle boundary, and rearrangement of atomic structure in cell area of 'quasi-fluid'. The suspension bond of alloy atom was fixed in the cell of 'quasi-fluid', and this provided structure factor and energy for the growth of nanotube. |
| |
| Keywords: | nanotube quasi-fluid state Cu-Zn-Al alloy transmission electron microscope |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
