| 基于Fluent的搅拌流场模拟研究 |
| |
| 作者姓名： | 毕学工 岳 锐 周进东 杨 福 |
| |
| 作者单位： | 武汉科技大学钢铁冶金及资源利用省部共建教育部重点实验室 |
| |
| 基金项目： | 国家科技支撑计划资助项目(2007BAB15B04) |
| |
| 摘 要： | 使用Fluent对某钢厂KR脱硫搅拌工艺过程进行数值模拟,研究桨叶长度、搅拌头插入深度及转速对搅拌效果的影响。结果表明,尺寸为2B=1 300mm的长浆叶搅拌头搅拌效果较好,搅拌头插入深度为液面下800mm左右较为适宜,搅拌头转速以80～120r/min为宜。
|
| 关 键 词： | KR预处理脱硫 搅拌流场 模拟 Fluent |
| 收稿时间： | 2012/1/11 0:00:00 |
Simulating mixing flow field by Fluent |
| |
| Authors: | Bi Xuegong Yue Rui Zhou Jindong and Yang Fu |
| |
| Institution: | (Key Laboratory for Ferrous Metallurgy and Resources Utilization of Ministry of Education,Wuhan University of Science and Technology,Wuhan 430081,China) |
| |
| Abstract: | In light of the actual production process in a certain steelworks,numerical simulation was carried out of the KR desulphurization mixing process by Fluent.The influence of blades length,stirring speed and blender insertion depth on mixing effect was discussed.The results show that,the long blade stirring head of 2B=1 300 mm boasts a comparatively better stirring effect,the best blender insertion depth is 800 mm beneath the liquid surface,and the most appropriate stirring speed is 80~120 r/min. |
| |
| Keywords: | KR pretreatment desulphurization mixing flow field simulation Fluent |
| 本文献已被 CNKI 维普 等数据库收录！ |
| 点击此处可从《》浏览原始摘要信息 |
| 点击此处可从《》下载免费的PDF全文 |
