|
|||||
|
|
| 高铬铸铁型自保护药芯焊丝堆焊组织与性能分析 | |
| 引用本文： | 李达,郝飞飞,刘庆峰,唐丽芳,杨庆祥. 高铬铸铁型自保护药芯焊丝堆焊组织与性能分析[J]. 燕山大学学报, 2009, 33(3) |
| 作者姓名： | 李达 郝飞飞 刘庆峰 唐丽芳 杨庆祥 |
| 作者单位： | 1. 燕山大学,亚稳材料制备技术与科学国家重点实验室,河北,秦皇岛066004 2. 大连市锅炉压力容器检验研究所,辽宁,大连,116013 3. 大连天亿天然气有限公司,辽宁,大连,116000 |
| 摘 要： | 研制了一种自保护高铬铸铁型药芯焊丝,对其堆焊金属组织与性能进行了分析,结果表明:堆焊金属表面硬度达到HRC60以上,堆焊金属显微组织主要为马氏体+残余奥氏体+M1C3,型碳化物;初生碳化物主要沿堆焊层向母材方向生长,其表面硬度为HVl783,侧面为HVll27:共晶碳化物围绕在初生碳化物周围生长,其显微硬度为HV830:在相同磨损条件下磨损1h后,堆焊金属相对耐磨性为Q235钢的14倍左右,在药芯中加入适量的稀土氧化物能提高堆焊金属的耐磨性. |
| 关 键 词： | 药芯焊丝 堆焊金属 显微组织 碳化物 |
Analysis of microstructures and properties on hardfacing metal of self-shielded flux-cored wire with high chromium cast iron type |
|
| LI Da,HAO Fei-fei,LIU Qing-feng,TANG Li-fang,YANG Qing-xiang. Analysis of microstructures and properties on hardfacing metal of self-shielded flux-cored wire with high chromium cast iron type[J]. Journal of Yanshan University, 2009, 33(3) | |
| Authors: | LI Da HAO Fei-fei LIU Qing-feng TANG Li-fang YANG Qing-xiang |
| Affiliation: | 1. State Key Laboratory of Metastable Materials Science and Technology;Yanshan University;Qinhuangdao;Hebei 066004;China;2. Dalian Boiler and Pressure Vessel Inspection Institute;Dalian;Liaoning 116013;3. Dalian Tianyi Natural Gas LTD.;Liaoning 116000;China |
| Abstract: | A self-shielded flux-cored wire with high chromium cast iron is developed. The microstructures and properties of the hardfacing metal are analyzed. The results show that, the hardness of the hardfacing metal is above HRC60 and the microstructures are mainly composed of martensite, residual austenite and M7C3 type carbides. The growth direction of the primary carbide is nearly perpendicular to the matrix. The surface hardness of the primary carbide is about HV1783 and the side is HV1127. The eutectic carbide... |
| Keywords: | flux-cored wire hardfacing metal microstructure carbide |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |