| 短碳纤维增强尼龙6复合材料的制备与研究 |
| |
| 引用本文： | 李春华,宋国君,杨淑静,孙伟,杨超. 短碳纤维增强尼龙6复合材料的制备与研究[J]. 科学技术与工程, 2010, 10(2) |
| |
| 作者姓名： | 李春华 宋国君 杨淑静 孙伟 杨超 |
| |
| 作者单位： | 青岛大学高分子材料研究所,青岛,266071 |
| |
| 摘 要： | 碳纤维复合材料是通过双螺杆反应挤出机复合制备,研究了复合材料的微结构和力学性能,碳纤维的扫描电镜照片显示,处理后的碳纤维较未处理碳纤维有更好的表面粗糙度。复合材料断面照片显示处理后的碳纤维和基体尼龙6材料有着很好的界面结合。复合材料的力学性能得到提高,其拉伸强度和拉伸模量分别提高了33%和50%。
|
| 关 键 词： | 碳纤维 双螺杆挤出 硝酸氧化 界面结合 |
| 收稿时间： | 2009-07-05 |
| 修稿时间： | 2009-07-18 |
study on preparation of Short Carbon Fiber Reinforced Nylon6 Composite |
| |
| li chunhu,song guojun,yang shujing,sun wei and yang chao. study on preparation of Short Carbon Fiber Reinforced Nylon6 Composite[J]. Science Technology and Engineering, 2010, 10(2) |
| |
| Authors: | li chunhu song guojun yang shujing sun wei yang chao |
| |
| Affiliation: | Institute of Polymer Materials/a>;Qingdao University/a>;Qingdao 266071/a>;P.R.China |
| |
| Abstract: | Carbon fiber-reinforced composites (CFRP) were prepared successfully by twin-screw extruder.Microstructure and mechanical properties of CFRP were studied.Scanning electron microscope(SEM) photograph of carbon fiber(CF) treated by nitric acid indicated more legible grooves than that of untreated one.It shows good matrix-carbon fiber adhesion between the treated CF with fracture surface morphology and PA6.The mechanical property of composite is enhanced compared with pure PA6.Especially,tensile strength and t... |
| |
| Keywords: | carbon fiber twin-screw extruder nitric acid oxidation interfacial adsion |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《科学技术与工程》浏览原始摘要信息 |
|
点击此处可从《科学技术与工程》下载全文 |
|
