| 翻管工艺的研究 |
| |
| 引用本文： | 黄早文,胡国安,郭芷荣,涂方正. 翻管工艺的研究[J]. 华中科技大学学报(自然科学版), 1991, 0(Z3) |
| |
| 作者姓名： | 黄早文 胡国安 郭芷荣 涂方正 |
| |
| 作者单位： | 华中理工大学机械工程二系(黄早文，胡国安，郭芷荣)，航空航天部六○二所(涂方正) |
| |
| 摘 要： | 本文通过对外翻管工艺的实验研究,分析了翻管的变形特征,提出了扩口-卷曲-翻卷三种变形模式和扩口刚性端的概念.分析研究变形模式的转化条件和各种失稳型式产生的原因,导出了锥形模翻管的临界锥角、自由卷曲半径和圆角模翻管的终止曲率半径的公式.提供了翻管的多种方法、模具设计基本要求和一些有效的工艺措施.
|
| 关 键 词： | 翻管工艺 翻卷 失稳 临界锥角 卷曲半径 卷曲角 |
On the Tube Evagination Technology |
| |
| Huang Zaowen Hu Guoan Guo Zhirong Tu Fangzheng. On the Tube Evagination Technology[J]. JOURNAL OF HUAZHONG UNIVERSITY OF SCIENCE AND TECHNOLOGY.NATURE SCIENCE, 1991, 0(Z3) |
| |
| Authors: | Huang Zaowen Hu Guoan Guo Zhirong Tu Fangzheng |
| |
| Affiliation: | Huang Zaowen Hu Guoan Guo Zhirong Tu Fangzheng |
| |
| Abstract: | A special metal forming process, the tube evagination, is studied. Through experimental investigation, it has been found that tube evagination is a transforming process with three deformation modes, flaring, curling and evagination. An idea of flaring rigid end is suggested. The influence of some technological parameters such as the flaring rigid end, conical die angle etc. On the evaginating process, and the transforming conditions for the three deformation modes are analyzed. The failure modes observed in the experiments and the reason for their occurrence are discussed. The ex-pressions for critical die angle acr, free curling radius p, the final curling angle and final radius of curvature p, in agreement with the experi-mental results are derived. Various technological processes for tube evagi-nation and basic requirements on the die design are proposed. |
| |
| Keywords: | Tube evagination technology Curling Failure Critical die an gle Curling radius Curling angle |
| 本文献已被 CNKI 等数据库收录！ |
|
