| 三维成像载荷地面快速融合处理方法研究 |
| |
| 引用本文： | 黎荆梅,周梅,张正,张慧静. 三维成像载荷地面快速融合处理方法研究[J]. 科学技术与工程, 2015, 15(13) |
| |
| 作者姓名： | 黎荆梅 周梅 张正 张慧静 |
| |
| 作者单位： | 中国科学院光电研究院,中国科学院定量遥感信息技术重点实验室,北京100094 |
| |
| 基金项目： | 中国科学院科研装备研制项目“高精度快速三维成像载荷地面检校系统” |
| |
| 摘 要： | 三维成像载荷是一种能够同时采集激光雷达数据以及CCD影像,并快速融合生成三维立体影像的新型载荷。在分析载荷工作原理的基础上,面向载荷的地面检校及成像试验,提出了一种针对该新型三维成像载荷的地面快速数据融合处理方法;并利用地面实测数据对方法进行了验证。结果表明,该方法能快速生成实验区的三维影像,同时也验证了该类型载荷对激光雷达数据与影像数据快速融合的能力。
|
| 关 键 词： | 三维成像载荷 三维影像 快速融合 线阵CCD 激光雷达 |
| 收稿时间： | 2014-12-17 |
| 修稿时间： | 2015-01-09 |
Research on Fast Fusion of Laser Point Cloud and CCD Image Acquired by the 3D Imaging Payload |
| |
| LI Jing-mei , ZHOU Mei , ZHANG Zheng , ZHANG Hui-jing. Research on Fast Fusion of Laser Point Cloud and CCD Image Acquired by the 3D Imaging Payload[J]. Science Technology and Engineering, 2015, 15(13) |
| |
| Authors: | LI Jing-mei ZHOU Mei ZHANG Zheng ZHANG Hui-jing |
| |
| Affiliation: | Key Laboratory of Quantitative Remote Sensing Information Technology, Academy of Opto-electronics, Chinese Academy of Sciences,Key Laboratory of Quantitative Remote Sensing Information Technology, Academy of Opto-electronics, Chinese Academy of Sciences,Key Laboratory of Quantitative Remote Sensing Information Technology, Academy of Opto-electronics, Chinese Academy of Sciences |
| |
| Abstract: | Based on the analysis of the principle of the 3D imaging payload, a fast fusion method aiming at this new kind of payload is proposed for ground static calibration and imaging tests. This method is validated by using the experimental data. The effectiveness of the method is proved by the experimental results of the test data. The result also verified the fast fusion capacity of the payload for the CCD image and LiDAR point cloud. |
| |
| Keywords: | 3D image payload three-dimensional image fast fusion linear CCD LiDAR point cloud |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《科学技术与工程》浏览原始摘要信息 |
|
点击此处可从《科学技术与工程》下载全文 |
|
