首页 | 本学科首页   官方微博 | 高级检索  
     检索      

深冷处理对高速钢高低温力学性能的影响研究
引用本文:李雄,李士燕,袁子洲,刘秀芝.深冷处理对高速钢高低温力学性能的影响研究[J].兰州理工大学学报,2001,27(3):19-22.
作者姓名:李雄  李士燕  袁子洲  刘秀芝
作者单位:甘肃工业大学材料科学与工程学院,
摘    要:研究了深冷处理和未深冷处理的试样在室温及高温下的力学性能 .结果表明 ,深冷处理试样的力学性能明显提高 ;深冷处理和未深冷处理试样的磨损表面形貌和垂直截面形貌有显著差异 ,说明它们有不同的磨损规律 ;通过X 射线衍射还发现 ,深冷处理可使马氏体轴比和碳含量下降 ,促使新相碳化物MC析出 .

关 键 词:深冷处理  高速钢  力学性能  磨损  轴比
文章编号:1000-5889(2001)03-0019-04
修稿时间:2001年1月11日

Effect of cryogenic treatment on mechanical properties of high-speed steel at high temperature and room temperature
LI Xiong,LI Shi yan,YUAN Zi zhou,LIU Xiu zhi.Effect of cryogenic treatment on mechanical properties of high-speed steel at high temperature and room temperature[J].Journal of Lanzhou University of Technology,2001,27(3):19-22.
Authors:LI Xiong  LI Shi yan  YUAN Zi zhou  LIU Xiu zhi
Abstract:The mechanical properties of cryogenically treated high speed steel samples at room temperature and high temperature and entreated ones are investigated. It is shown that cryogenic treatment of the samples can improve their mechanical properties remarkably and that there is obvious difference in the morphology of wearing surface and perpendicular cross section for treated and untreated samples, so that it can be induced that they are obedient to different wear patterns. It is discovered by X ray diffraction analysis that the c/a ratio and carbon quantity of martensite in treated wearing surface is lower than those in untreated wearing surface, and cryogenic treatment can enforce MC to precipitate .
Keywords:cryogenic treatment  high speed steel  mechanical property  wear  c/a  ratio
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号