首页 | 本学科首页   官方微博 | 高级检索  
     

用热点应力评定双相不锈钢焊接接头疲劳强度
引用本文:贾法勇 霍立兴 吴冰 杨新岐 金晓军. 用热点应力评定双相不锈钢焊接接头疲劳强度[J]. 天津大学学报(自然科学与工程技术版), 2004, 37(11): 1014-1017
作者姓名:贾法勇 霍立兴 吴冰 杨新岐 金晓军
作者单位:天津大学材料科学与工程学院,天津300072
基金项目:教育部博士点基金资助项目(1999005605).
摘    要:针对双相不锈钢焊接结构的疲劳性能问题,通过试验对双相不锈钢纵向角接板焊接接头和侧面角接板焊接接头疲劳强度用热点应力进行了评定,做出了热点应力S-N曲线并与名义应力疲劳评定进行了比较.说明符合本试验型式及尺寸的这两种焊接接头用名义应力评定时疲劳数据分散性很大,试验疲劳级别分别为FAT136和FAT102;用热点应力评定时疲劳数据分散性明显减小,其疲劳强度可以用一条S-N曲线表示,试验疲劳级别为FAT162。

关 键 词:双相不锈钢 热点应力 名义应力 疲劳评定
文章编号:0493-2137(2004)11-1014-04
修稿时间:2003-06-19

Evaluation on Fatigue Strength of Duplex Stainless Steel Welded Joints by Hot Spot Stress
JIA Fa-yong,HUO Li-xing,WU Bing,YANG Xin-qi,JIN Xiao-jun. Evaluation on Fatigue Strength of Duplex Stainless Steel Welded Joints by Hot Spot Stress[J]. Journal of Tianjin University(Science and Technology), 2004, 37(11): 1014-1017
Authors:JIA Fa-yong  HUO Li-xing  WU Bing  YANG Xin-qi  JIN Xiao-jun
Abstract:The fatigue strength of duplex stainless steel welded jointing with longitudinal fillet welded gusset and with longitudinal flat side gusset welded on plate were evaluated by hot spot stress,and the hot spot stress S-N curves were obtained and compared with the nominal stress S-N curves. The analyses show that the fatigue data of the two kinds welded joints corresponding to the types and dimension in the test is dispersed greatly when it is evaluated by nominal stress and the fatigue strength tested FAT136 and FAT102 respectively. But the dispersity evaluated by hot spot stress is reduced largely, thus only one S-N curve can express the fatigue strength of the two kinds welded joints with longitudinal fillet welded gusset and with longitudinal flat side gusset welded on plate. The fatigue strength tested is FAT162.
Keywords:duplex stainless steel  hot spot stress  nominal stress  fatigue evaluation  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号