| 水性预交联聚丙烯酸酯涂料印花粘合剂的合成研究 |
| |
| 引用本文： | 邢宏龙,连媛.水性预交联聚丙烯酸酯涂料印花粘合剂的合成研究[J].安徽工程科技学院学报,2005,20(4):8-11. |
| |
| 作者姓名： | 邢宏龙 连媛 |
| |
| 作者单位： | 安徽理工大学,化学工程系,安徽,淮南,232001 |
| |
| 摘 要： | 通过预交联技术合成出水性聚丙烯酸酯涂料印花粘合剂.研究了交联单体、功能单体、乳化剂和引发剂对聚合反应的影响.结果表明,交联单体的选择及用量是预交联技术的关键;功能单体对胶乳粒子大小及分布有较大影响;用阴/非离子复配的乳化剂能使聚合体系达到较好的稳定性;引发剂为单体总量的0.6%.
|
| 关 键 词： | 预交联 聚丙烯酸酯 粘合剂 涂料印花 预交联 聚丙烯酸酯 涂料印花粘合剂 合成研究 binder printing polyacrylate 功能单体 稳定性 聚合体系 非离子 粒子大小及分布 胶乳 用量 的选择 结果 影响 聚合反应 引发剂 乳化剂 |
| 文章编号： | 1672-2477（2005）04-0008-04 |
| 收稿时间： | 09 10 2005 12:00AM |
| 修稿时间： | 2005-09-10 |
Synthesis of water-borne and pre-crosslinking polyacrylate printing binder |
| |
| XING Hong-long,LIAN Yuan.Synthesis of water-borne and pre-crosslinking polyacrylate printing binder[J].Journal of Anhui University of Technology and Science,2005,20(4):8-11. |
| |
| Authors: | XING Hong-long LIAN Yuan |
| |
| Institution: | Dept. of Chem. Engn. ,Anhui University of Science and Technology. Huainan 232001 ,China |
| |
| Abstract: | Water-borne polyacrylate(PA) printing binder was synthesized through the pre-crosslinking technique.The influences of crosslinked monomer,functional monomer,emulsifier and initiator on the properties of PA emulsion and its film were studied.The results obtained were as follows:the key point of pre-crosslinking technique was the kind and dosage of crosslinked monomer.The particle size and distribution of latex was influenced by functional monomer.The stability of latex was sufficed by compounded systems of anionic and nonionic surfactants.The dosage of initiator is 0.6%. |
| |
| Keywords: | pre-crosslinking technique polyacrylate binder pigment printing |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
