首页 | 本学科首页   官方微博 | 高级检索  
     检索      

高压实膨润土-砂混合型缓冲材料的渗透性能研究
引用本文:周海田,王哲,易发成,牛韶军,马盼军.高压实膨润土-砂混合型缓冲材料的渗透性能研究[J].科学技术与工程,2017,17(17).
作者姓名:周海田  王哲  易发成  牛韶军  马盼军
作者单位:核废物与环境安全国防重点学科实验室;核废物与环境安全国防重点学科实验室,核废物与环境安全国防重点学科实验室、中国科学技术大学地球与空间科学学院,核废物与环境安全国防重点学科实验室,核废物与环境安全国防重点学科实验室,核废物与环境安全国防重点学科实验室
基金项目:国家自然科学基金项目(41402248);非金属复合与功能材料科技部重点实验室开放基金项目(11zxfk06);核废物与环境安全国防重点学科实验室团队基金项目(13zxnk08);核废物与环境安全四川省协同创新中心预研基金项目(15yyhk03);西南科技大学重点科研平台专职科研创新团队基金(14tdhk01);四川省教育厅科研项目资助(16ZB0150);西南科技大学研究生创新基金资助项目(15ycx051,15ycx052)
摘    要:缓冲材料作为高放废物深地质处置中的最后一道人工屏障,它的水力学屏障作用直接影响到化学屏障作用的有效发挥及处置库的长期稳定性及安全性。采用自主研制的高压实黏土渗透实验装置,探讨了不同干密度和掺砂率条件下的膨润土-石英砂混合型缓冲饱和侧限渗透性能。实验研究结果表明,随着掺砂率的增加,膨润土-石英砂混合型缓冲材料的渗透系数先减小再增大,当掺砂率为10%时,缓冲材料的渗透系数最小,其最佳掺砂率为10%;缓冲材料的渗透系数随着试样干密度增加而减小,干密度控制在1.6~1.8 g/cm~3时,能够更好地满足高放废物深地质处置库对缓冲材料的渗透特性的要求。

关 键 词:缓冲材料  渗透性能  干密度  掺砂率
收稿时间:2016/12/19 0:00:00
修稿时间:2017/2/17 0:00:00

Research on permeability of high compacted sand-bentonite mixtures as buffer material
ZHOU Hai-tian,and.Research on permeability of high compacted sand-bentonite mixtures as buffer material[J].Science Technology and Engineering,2017,17(17).
Authors:ZHOU Hai-tian  and
Institution:Nuclear Wastes and Environmental Safety Laboratory, Southwest University of Science and Technology,,,,
Abstract:Buffer material as the last Artificial barrier in the deep geological disposal of high-level radioactive waste, its hydraulic barrier function works effectively or ineffectively directly influence the chemical barrier function, the long-term stability and security of the repository. This study use self-developed high-pressure clay rigid wall permeameter explored saturated permeability performance of bentonite-quartz sand mixtures as buffer material in different dry density and mixed sand ratio. The test results show that with sand mixing ratio increase permeability coefficient showed a trend ofS first increaseSand thenSdecrease, 10% sanding rate permeability coefficient is minimum, shows that the best sanding rate is 10%; permeability coefficient decreases with the increase of dry density. When maintain dry density between 1.6g/cm3 to 1.8g/cm3, the permeability coefficient can be better meeting the request about buffer material in theSrepositorySofShigh-radioactiveSwasteSdisposal.
Keywords:buffer  material  permeability  dry density  sand mixing  ratio
本文献已被 CNKI 等数据库收录!
点击此处可从《科学技术与工程》浏览原始摘要信息
点击此处可从《科学技术与工程》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号