| 液压夹紧回路动态特性仿真 |
| |
| 引用本文： | 张国泰,杨静.液压夹紧回路动态特性仿真[J].盐城工学院学报(自然科学版),2018,31(2):35-39. |
| |
| 作者姓名： | 张国泰 杨静 |
| |
| 作者单位： | 燕山大学机械工程学院 |
| |
| 摘 要： | 以M250A普通内圆磨床液压夹紧回路为例,建立了描述夹紧回路动态特性的状态空间数学模型,并在MATLAB/Simulink环境下建立其仿真模型,应用计算机仿真的方法,研究了不同的容腔体积和油液的体积弹性模量对夹紧回路动态特性的影响。结果表明:从超调量和过渡时间的角度看,容腔体积和油液弹性模量对回路动态响应的影响具有两面性。
|
| 关 键 词： | 夹紧回路 状态空间 Simulink 动态特性 |
| 收稿时间： | 2018/3/9 0:00:00 |
Dynamic Characteristic Simulation of Hydraulic Clamping Circuit |
| |
| ZHANG Guotai and YANG Jing.Dynamic Characteristic Simulation of Hydraulic Clamping Circuit[J].Journal of Yancheng Institute of Technology(Natural Science Edition),2018,31(2):35-39. |
| |
| Authors: | ZHANG Guotai and YANG Jing |
| |
| Institution: | School of Mechanical Engineering, Yanshan University, Qinhuangdao Hebei066000, China and School of Mechanical Engineering, Yanshan University, Qinhuangdao Hebei066000, China |
| |
| Abstract: | Taking the hydraulic clamping circuit of a plain grinding machine internal M250A as an example, a state space mathematical model describing the dynamic characteristics of the clamping circuit is established. The simulation model is established under the MATLAB/Simulink environment, and the influence of different volume of the cavity and the bulk modulus of the liquid on the dynamic characteristics of the clamping loop is studied by the method of computer simulation. The results show that from the perspective of overshoot and transition time, the influence of cavity volume and oil elastic modulus on the dynamic response of the loop has two sides. |
| |
| Keywords: | clamping circuit state space Simulink dynamic characteristics |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《盐城工学院学报(自然科学版)》浏览原始摘要信息 |
| 点击此处可从《盐城工学院学报(自然科学版)》下载免费的PDF全文 |
