| 硬质合金刀具和涂层刀具车削加工Ti-6Al—4V的性能研究 |
| |
| 引用本文： | 冯鸿钦. 硬质合金刀具和涂层刀具车削加工Ti-6Al—4V的性能研究[J]. 龙岩师专学报, 2010, 0(2): 29-31 |
| |
| 作者姓名： | 冯鸿钦 |
| |
| 作者单位： | 闽西职业技术学院,福建龙岩364021 |
| |
| 摘 要： | 采用硬质合金刀具和硬质合金涂层刀具在低速和高速两种切削状态下进行Ti-6Al—4V的车削对比试验，通过对两种刀具的刀具寿命和刀具的磨损形貌进行观察分析，研究硬质合金刀具和涂层刀具在不同切削状态下的切削性能。
|
| 关 键 词： | 刀具材料 Ti-6Al—4V 刀具寿命 磨损机理 |
Performances of Straight Cemented Carbide Tool and Coated Carbide Tool in Turning Ti-6Al-4V Alloy |
| |
| FENG Hong-qin. Performances of Straight Cemented Carbide Tool and Coated Carbide Tool in Turning Ti-6Al-4V Alloy[J]. Journal of Longyan Teachers College, 2010, 0(2): 29-31 |
| |
| Authors: | FENG Hong-qin |
| |
| Affiliation: | FENG Hong-qin |
| |
| Abstract: | Straight cemented carbide tools and coated carbide tools were used in slow and high speed dry turning Ti-6Al-4V alloy. The tool life and tool wear of both tools were examined at two different cutting conditions, and the performances of straight cemented carbide tools and coated carbide tools in machining Ti-6Al-4V alloy were then compared. |
| |
| Keywords: | tool material Ti-6Al-4V tool life wear mechanisms |
| 本文献已被 维普 等数据库收录！ |
