首页 | 本学科首页   官方微博 | 高级检索  
     

四川盆地双鱼石区块深井钻井井斜规律研究
引用本文:米光勇,袁和义,王强,缪遥,董广建. 四川盆地双鱼石区块深井钻井井斜规律研究[J]. 西南石油大学学报(自然科学版), 2021, 43(4): 62-70. DOI: 10.11885/j.issn.16745086.2021.05.05.01
作者姓名:米光勇  袁和义  王强  缪遥  董广建
作者单位:1. 中国石油西南油气田公司开发事业部, 四川 成都 610051;2. 中国石油西南油气田公司川西北气矿, 四川 江油 621709;3. 中国石油川庆钻探工程有限公司川西钻探公司, 四川 成都 610051;4. 油气藏地质及开发工程国家重点实验室·西南石油大学, 四川 成都 610500
基金项目:中国博士后科学基金(2020M683357);中国石油西南油气田川西北气矿重大科研项目(XNS川西北矿JS2020-55);中国石油-西南石油大学创新联合体项目(2020CX040202)
摘    要:针对双鱼石区块井斜控制问题,考虑钻头与地层互作用、地层倾角、井斜角、地层各向异性指数、地层自然造斜力、钻头侧向力,综合建立了钻头侧向力模型,根据不同影响因素探讨了井斜变化规律,通过实钻资料验证了模型的正确性。结果表明,与常规钻井方式相比,空气钻井条件下地层自然造斜力增加,且增加幅度较大。随着地层倾角增加,地层自然造斜力增加。随着井斜角的增大,钻头综合侧向力减小,在空气钻井中和常规泥浆钻井中,钻头综合侧向力均存在零值平衡点。随着地层各向异性指数的增加,地层自然造斜能力增大导致井斜角增大。结合理论研究,通过钻具组合优化、钻井参数优选提出井斜控制措施,将该区块深层易斜地层井斜角降低至0.50°~1.15°,机械钻速提高了40%~85%。研究结果可为超深层井斜规律的研究和高效控制提供重要的参考和指导。

关 键 词:双鱼石区块  深井  井斜  地层自然造斜力  钻头综合侧向力  
收稿时间:2021-05-05

A Study on Deep Well Deviation in Shuangyushi Block,Sichuan Basin
MI Guangyong,YUAN Heyi,WANG Qiang,MIAO Yao,DONG Guangjian. A Study on Deep Well Deviation in Shuangyushi Block,Sichuan Basin[J]. Journal of Southwest Petroleum University(Seience & Technology Edition), 2021, 43(4): 62-70. DOI: 10.11885/j.issn.16745086.2021.05.05.01
Authors:MI Guangyong  YUAN Heyi  WANG Qiang  MIAO Yao  DONG Guangjian
Affiliation:1. Development Division, PetroChina Southwest Oil & Gas Field Company, Chengdu, Sichuan 610051, China;2. Northwestern Sichuan Gas District, PetroChina Southwest Oil & Gas Field Company, Jiangyou, Sichuan 621709, China;3. CCDC Chuanxi Drilling Company, Chengdu, Sichuan 610051, China;4. State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation, Southwest Petroleum University, Chengdu, Sichuan 610500, China
Abstract:To solve the problem of well deviation in Shuangyushi Block, We establish a model of drill bit deflection force with consideration of interaction between bit and formation, formation dip, inclination, angle, formation anisotropy index, formation deflection force and drill bit deflection force. And we explore the law of well deviation change under different influencing factors and verify the correctness of the model based on actual drill data. The results show that, compared with drilling fluid drilling, the formation deflection force increases under air drilling conditions. When the inclination angle is smaller than the formation dip, the formation force is a deflection force, which causes the drill bit to deviate upwards. Increasing the drilling pressure will cause the inclination angle to increase. As the formation dip angle increases, the natural forming force of the formation increases. As the inclination angle increases, the combined lateral force decreases. The resultant force of the bit has a balanced point. With the increase of the formation anisotropy index, the natural deflection ability of the formation increases, leading to the increase of the well inclination angle. According to the results of theoretical analysis, an integrated quantitative measure is proposed for drilling tool assembly, bit optimization, and drilling parameters, which reduces the inclination angle of ultra-deep formations with easy deflection to 0.50°~1.15ånd increases the ROP by 40%~85%. The results of this paper can provide important reference and guidance for the study and efficient control of ultra-deep well deviation rules.
Keywords:Shuangyushi Block  deep well  well deviation  formation deflection force  comprehensive drill bit deflection force  
本文献已被 CNKI 等数据库收录!
点击此处可从《西南石油大学学报(自然科学版)》浏览原始摘要信息
点击此处可从《西南石油大学学报(自然科学版)》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号