首页 | 本学科首页   官方微博 | 高级检索  
     检索      

宽板坯连铸二冷区喷嘴冷却特性研究
引用本文:程常桂,万文成,车芳,余乐,刘中天.宽板坯连铸二冷区喷嘴冷却特性研究[J].武汉科技大学学报(自然科学版),2010,33(5).
作者姓名:程常桂  万文成  车芳  余乐  刘中天
作者单位:武汉科技大学钢铁冶金及资源利用省部共建教育部重点实验室,湖北,武汉,430081
基金项目:湖北省自然科学基金资助项目 
摘    要:根据宽板坯连铸实际工况条件,测定不同冷却条件下喷嘴的冷却特性曲线,分析不同喷嘴布置与连铸实际需要条件的关系.结果表明,喷嘴水流密度峰值随着冷却水量的增加而变大,水流覆盖区域变宽;当喷嘴冷却水量过大时,水流密度分布均匀性不好;气体压力对喷嘴水流密度分布影响不大;双喷嘴喷淋水重叠区的叠加效应随着左边喷嘴冷却水量的递减呈明显的下降趋势,随两喷嘴间距的变大而逐渐减弱;喷嘴间距为450 mm时,铸坯表面喷淋水流密度分布更为合理.

关 键 词:宽板坯  连铸  喷嘴  冷却特性

Experimental study on nozzles cooling characteristics in the secondary cooling zone of wide slab caster
Cheng Changgui,Wan Wencheng,Che Fang,Yu Le,Liu Zhongtian.Experimental study on nozzles cooling characteristics in the secondary cooling zone of wide slab caster[J].Journal of Wuhan University of Science and Technology(Natural Science Edition),2010,33(5).
Authors:Cheng Changgui  Wan Wencheng  Che Fang  Yu Le  Liu Zhongtian
Institution:Cheng Changgui,Wan Wencheng,Che Fang,Yu Le,Liu Zhongtian(Key Laboratory for Ferrous Metallurgy and Resources Utilization of Ministry of Education,Wuhan University of Science and Technology,Wuhan 430081,China)
Abstract:The paper determines the nozzle cooling characteristics in different cooling intensions combined with the actual wide slab continuous casting process conditions,and analyzes the relations of nozzle arrangement and real requirement of the continuous casting process.The results are mainly as follows: the water volume density peak value increases with the cooling water volume increasing,and spray zone broadens;when the water volume is egregiously bigger,the water volume density distribution breaks up;the gas p...
Keywords:wide slab  continuous casting  nozzle  cooling characteristics  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号