|
|||||
|
|
| 花洒面板注射模优化设计 | |
| 引用本文： | 葛晓宏,黄红武,李辉,杨辉煌,刘亚丹.花洒面板注射模优化设计[J].厦门理工学院学报,2008,16(3):20-25. |
| 作者姓名： | 葛晓宏 黄红武 李辉 杨辉煌 刘亚丹 |
| 作者单位： | 1. 厦门大学物理与机电工程学院,福建,厦门,361021;厦门理工学院材料成形与模具集成技术研究所,福建,厦门,361021 2. 厦门理工学院材料成形与模具集成技术研究所,福建,厦门,361021 3. 厦门大学物理与机电工程学院,福建,厦门,361021 |
| 基金项目： | 福建省科技计划，福建省厦门市科技计划 |
| 摘 要： | 借助CAE技术对花洒面板注射模的浇注系统和冷却系统进行优化设计和模拟验证，克服了表面变形，保证了出水孔的圆度和位置度．采用变斜度斜顶杆顶出机构，避免了斜顶杆头部的磨损，提高了模具寿命．生产实践表明，模具结构合理，生产效率高，所生产的塑件可以满足质量要求． |
| 关 键 词： | 注射模 CAE 浇注系统 冷却系统 斜顶杆机构 |
Optimization Design of Injection Mould for Shower Panel |
|
| GE Xiao-hong,HUANG Hong-wu,LI-Hui,YANG Hui-huang,LIU Ya-dan.Optimization Design of Injection Mould for Shower Panel[J].Journal of Xiamen University of Technology,2008,16(3):20-25. | |
| Authors: | GE Xiao-hong HUANG Hong-wu LI-Hui YANG Hui-huang LIU Ya-dan |
| Institution: | GE Xiao-hong, HUANG Hong-wu, LI-Hui, YANG Hui-huang, LIU Ya-dan ( 1. The School of Physics and Mechanical ＆ Electrical Engineering, Xiamen University, Xiamen 361005, China; 2. Institute of Material Processing and Die ＆ Mould Integrated Technology, Xiamen University of Teehnology, Xiamen 361024, China) |
| Abstract: | The CAE technology was used to simulate and validate gating system ＆ cooling system of shower panel injection mould, which could reduce the superficial deformation and assure the circular and position of outlet. The mould also adopted a kind of special angle ejector system, which could avoid abrasion at the top of angle ejector rod and improve the mould＇s life greatly. The production practice indicated the mould＇s structure was reasonably designed with high production efficiency. The plastic parts produced satisfied technical requirement. |
| Keywords: | CAE |
| 本文献已被 维普 万方数据 等数据库收录！ | |