| 氧化铜纳米粉的制备及分散方法 |
| |
| 引用本文： | 朱伟长,万玉宝,孙军,兰开东.氧化铜纳米粉的制备及分散方法[J].北京科技大学学报,2003,25(3):251-253. |
| |
| 作者姓名： | 朱伟长 万玉宝 孙军 兰开东 |
| |
| 作者单位： | 安徽工业大学化工与环境学院,马鞍山,243002 |
| |
| 基金项目： | 安徽省教育厅自然科学基金;2002KJ503; |
| |
| 摘 要： | 以CuSO4·5H2O为原料,首先制备出碱式碳酸铜前驱体.在350℃焙烧1h后,制备出 氧化铜纳米粒子,经XRD和TEM检测,粒径为30nm.在十二烷基苯磺酸钠水溶液中加入氧 化铜纳米粉,用稀HNO3,调节介质pH=3.0,得到均匀分散的氧化铜纳米粉水溶胶.
|
| 关 键 词： | 氧化铜纳米粉 制备方法 分散方法 纳米材料 碱式碳酸铜 十二烷基苯磺酸钠水溶液 水溶胶 |
| 修稿时间： | 2002年9月10日 |
Preparation and Dispersion ofNanoscale CuO Powders |
| |
| ZHU Weichang,WAN Yubao,SUN Jun,LAN Kaidong
School of Chemical Engineering and Environment,Anhui University of Technology,Maanshan ,China.Preparation and Dispersion ofNanoscale CuO Powders[J].Journal of University of Science and Technology Beijing,2003,25(3):251-253. |
| |
| Authors: | ZHU Weichang WAN Yubao SUN Jun LAN Kaidong
School of Chemical Engineering and Environment Anhui University of Technology Maanshan China |
| |
| Institution: | ZHU Weichang,WAN Yubao,SUN Jun,LAN Kaidong
School of Chemical Engineering and Environment,Anhui University of Technology,Maanshan 243002,China |
| |
| Abstract: | Nanoscale CuO powders were prepared by roasting a basic coppper carbonate precursor at 350C for 1 h. The obtained sample's microstructure was determined by XRD and TEM analysis. The results show that the diameter of the nanocrystalline is 30 nm. CuO sol were prepared with dodecylbenzene sulfonate solusion and at pH=3.0 adjusted by HNO3. |
| |
| Keywords: | CuO nanoscale powders preparation method dispersion |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
